Hi there

Welcome to our gemo counter section.

The main prominent features of the counters are;

- Possibility to add "Offset" to the count value
- Data security with encrypted login
- Ability to keep program and control parameters in memory
- Easy connection with socket terminal, double SET, single output (DS204)

- Double SET, double output (DS2x7),
- Batch and Totalizer feature (DS217BT)
- Calibration multiplier (DS20x) selectable from 0.001 to 9.999
- Calibration factor selectable between 0.00001 and 9.99999 (DS217) encoder input
- Forward/back counter feature with phase different input
- 7500Hz possibility to connect Switch, proximity sensor and Encoder
- Selectable counting frequency; 20, 500, 2500, 7500Hz
- Adjustable decimal point from 1st to 3rd digit (DS20x)
- Adjustable decimal between 1st and 5th digits

- Possibility to select 7 types of inputs / 10 types of outputs
- PRESET1 (possibility to choose absolute or relative)
- Output contacts; continuous output or 0.1..999.9 sec
- standard with electronic SSR output (open collector) and relay output
- Possibility to load the last count value at the time of power cut, at the opening after the power is cut off
- RESET possibility from the panel Possibility to monitor Preset1/2, batch and Totalizer values ​​on the display


Dear members, since there are many counter models;

For example, if the device you are going to buy has a 24v supply or if it has a ssr output, you must specify this information when ordering. Otherwise, it causes unnecessary cargo/phone/mail traffic.

We have technical support for the products purchased from our company for all models of gemo counters. Below you can find devices with many features and sizes.

The manuals and catalogs of the counters are available on the product pages.

---------

- Gemo plc price list  -

- Gemo Main page -

- Gemo PLC Lesson videos and forum -