Ge Fanuc Pac RX7i

RX7i Features and Specifications
CPE010, CPE020, and CRE020 Models

   IC698CPE010: 300 MHz CPU microprocessor
   IC698CPE020: 700 MHz CPU microprocessor
   IC698CRE020: 700 MHz CPU microprocessor with redundancy support

Serial Ports

These CPUs have three independent serial ports accessible from the front of the module. Ports 1 and 2 provide communication with external devices and can be used for firmware updates. The third serial port is used for the Ethernet Station Manager. All serial ports are isolated.
CPU Indicators (LEDs)

Five LED indicators show the operating status of the CPU:

   OK (Green): CPU is functioning properly.
   OK (Off): CPU problem. Contact technical support if the RUN and EN LEDs are blinking in an error pattern.
   OK, EN, RUN (Blinking): CPU is in boot mode, awaiting a firmware update.
   RUN (Green): CPU is in Run mode.
   EN (Green): Output scan is enabled.
   C1 and C2: Indicate signal activity on serial ports 1 and 2.

Technical Specifications

   Memory Capacity: 10 MB battery-backed RAM and 10 MB non-volatile flash memory.

   Power Requirements:
       CPE010: +5 VDC: 3.2 Amps, +12 VDC: 0.042 Amps, -12 VDC: 0.008 Amps
       CPE020, CRE020: +5 VDC: 4.5 Amps, +12 VDC: 0.042 Amps, -12 VDC: 0.008 Amps

   Operating Temperature:
       CPE010: 0°C - 50°C (with fan tray: 0°C - 60°C)
       CPE020, CRE020: 0°C - 60°C (fan tray required)

   Execution Speed:
       CPE010: 0.195ms per 1000 Boolean contacts
       CPE020, CRE020: 0.14ms per 1000 Boolean contacts

   Embedded Communication: RS-232, RS-485, Ethernet interface
   Serial Protocols: Modbus RTU Slave, SNP, Serial I/O
   Program Blocks: Supports up to 512 program blocks, each with a maximum size of 128KB.

   Memory:
       %I and %Q: 32Kbits for discrete inputs and outputs
       %AI and %AQ: Configurable up to 32Kwords
       %W: Configurable up to the maximum available user RAM
       Managed Memory: Configurable up to 10 MB

   Ethernet Features:
        Supports 10/100 Mbps half/full duplex Ethernet
        Up to 16 web server and FTP connections

Battery Life

With the IC698ACC701 battery pack, memory retention is estimated at 5 years at 20°C. For long-term backup, an external IC693ACC302 Auxiliary Battery Module can be used.

>> Ge Fanuc Pac RX7i User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc PacSystem and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."