GE FANUC ETM001 is a PLC communication module. It is used for data exchange between a control system and its supported network or field devices.

Product family: Ge-Fanuc Plc.

Selection and matching: Check protocol, physical port, communication speed, master/slave role, firmware and host-unit compatibility.

This item is listed in the used equipment section. Compare its label, connections and supplied components with your existing machine. Confirm whether accessories and companion devices are included before ordering.

Used products in the same group: Used Comm. Modules.

Editor’s note: The same connector does not establish the same protocol. Distinguish physical interfaces such as RS-485 from protocols such as Modbus, and verify the device role on the network.

Related pages and navigation: G-H-I, Second Hand Models, Second Hand.

Would you like to sell this product or similar equipment?
Send the brand/model, quantity, working or faulty condition, label and product photographs, and your asking price to otomasyonavm@gmail.com.

Write a review

Note: HTML is not translated!
Bad Good

GE FANUC ETM001

  • 100.00USD

  • Ex Tax: 100.00USD

Related Products

MDLC-HB-1-B

MDLC-HB-1-B

DERELL MDLC-HB-1-B is a DLC RS-485 Modbus RTU gateway. It is used for data exchange between a contro..

49.00USD Ex Tax: 49.00USD

Mitsubishi AJ65SBTB1-32D

Mitsubishi AJ65SBTB1-32D

 Hello ,  Wellcome to our Mitsubishi AJ65SBTB1-32D-CC-Link Small-Size Type Remote I/O Unit..

143.00USD Ex Tax: 143.00USD

Ge Fanuc IC220PBI002-BA

Ge Fanuc IC220PBI002-BA

 Hello ,  Wellcome to our Ge Fanuc IC220PBI002-BA / PROFIBUS NETWORK INTERFACE UNIT page,&..

1.00USD Ex Tax: 1.00USD

Ge Fanuc - aa

Ge Fanuc - aa

 Hello ,  Wellcome to our Ge Fanuc IC695ETM001-DF / IP Address of each Ethernet module pag..

1.00USD Ex Tax: 1.00USD