IC693CBL340

IC693CBL340 Interface Cable is approximately 19 inches (0.5 meters) long and is designed to connect the PTMPM Series 90-30 PLC module to the PTMIM DIN-rail mounted interface module. It is part of the IC693PTM100 assembly, which includes the PTMPM module, PTMIM interface module, and IC693CBL340 cable. This cable can also be ordered separately as a standalone item.


General Information for IC693CBL340/341 PTM Interface Cables:

These cables are specifically designed to link the PTM Processor Module (PTMPM), which is mounted on a Series 90-30 baseplate, with the PTM Interface Module (PTMIM) mounted on a DIN-rail. The IC693CBL340 cable is 19 inches (0.5 meters) in length, while the IC693CBL341 is 39 inches (1 meter) long.

Preliminary Information:
At the time of documentation, this information was preliminary and subject to change. The PTM was expected to be released in late 1999, and it's recommended to check with distributors for up-to-date details.


Cable Details:

    The cables feature straight-through connections, meaning that pin 1 connects to pin 1, pin 2 connects to pin 2, etc. However, some pins do not have connections.
    Each cable has a male plastic DB-25 connector on one end and a female plastic DB-25 connector on the other.
    The cable is twisted-pair to minimize electrical noise and crosstalk between signals.

Warning:

The PTMIM board operates with hazardous voltages. Before installing, testing, or troubleshooting, you must refer to the PTM User's Manual (GFK-1734). Failure to follow these guidelines may lead to personal injury or equipment damage.


Connector Pin Assignments:

Here are the pin assignments for the IC693CBL340/341 cables:
Pin Number    Signal Name and Function
1    VG+, Voltage Generator positive lead
2    IN+, Current Neutral positive lead
3    VA+, Voltage phase A positive lead
4    IA+, Current phase A positive lead
5    No Connection
6    VB+, Voltage phase B positive lead
7    IB+, Current phase B positive lead
8    VC+, Voltage phase C positive lead
9    IC+, Current phase C positive lead
10    Cable shield
11    No Connection
12    Frame Ground
13    No Connection
14    VG–, Voltage Generator negative lead
15    IN–, Current Neutral negative lead
16    VA–, Voltage phase A negative lead
17    IA–, Current phase A negative lead
18    No Connection
19    VB–, Voltage phase B negative lead
20    IB–, Current phase B negative lead
21    VC–, Voltage phase C negative lead
22    IC–, Current phase C negative lead
23    No Connection
24    No Connection
25    Frame Ground


Important Safety Notice:

These cables connect to circuits carrying hazardous voltages, so it's essential to use only factory-built cables to ensure both user safety and the protection of associated equipment.

+  IC693CBL340 User manual (pdf)

>> Ge fanuc 90-30 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693CBL340 Connectors and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."