IC693CBL327

IC693CBL327 Overview and Connection Details

    Left Side: Features a 24-pin, 90-degree angled connector.
    Right Side: The cable length is 3.0 meters (about 10 feet).
    Blue Band: The blue band on the label indicates compatibility with the MDL654 low-voltage module.

Connectors and Cables:

Connections are made to the module through two male 24-pin connectors (Fujitsu FCN–365P024–AU) located on the front of the module. The wiring to field devices uses a cable with a female connector on one end and stripped and tinned wires on the other end.

    You can purchase pre-wired cables with catalog numbers IC693CBL327 and IC693CBL328, or you can make your own cables. More information can be found in Appendix B.

Installation Guidelines:

    TTL Wiring Practices: Follow standard TTL wiring principles when installing this module.
    Noise Immunity: The I/O control lines connected to this module should be no longer than 30 meters, as signal attenuation limits the wiring length.

Pin Layout and Wiring Diagram:

The pin layout is detailed with connections like:

    I25, I27, I29, I31, COM, NC, 5V OUT, NC, and so on.
    Positive and negative connections are clearly marked as -- + and + --.

If the 24V OUT pin is used to connect to field devices, the isolation specification changes to:

    Field to Backplane (optical) and frame ground: 50 VAC continuous, 500 VAC for 1 minute.

TTL Wiring for Negative Logic:

To work with TTL outputs, it’s recommended to use the negative logic configuration as shown in the wiring diagram.

That’s a breakdown of the main features for the IC693CBL327 cable! Let me know if you need any more info or clarification!

>> IC693CBL327 cables User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693CBL327 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."