IC693CBL321
The IC693CBL321 cable is obsolete and has been replaced by the IC693CBL329 and IC693CBL330 cables. The IC693CBL321 is a 3 feet (1 meter) I/O cable that connects a 24-pin connector on a module to the connector on a terminal block. It is used with Terminal Block Quick Connect (TBQC) assemblies. For module lists and cable selection, see Appendix J.
IC693CBL330:
The IC693CBL330 is a 3 feet (1 meter) I/O cable with right-angle connectors on both ends. It connects the right-side 24-pin connector on a 32-point module or the single connector on a TBQC faceplate to the terminal block. This cable replaces the IC693CBL321 and is used with Terminal Block Quick Connect (TBQC) assemblies. Refer to Appendix J for additional module and cable selection information.
Function of the Cable:
These cables are used with 16-point I/O modules that are equipped with a TBQC I/O faceplate adaptor. Each cable has straight 24-pin female connectors on both ends and provides a pin-to-pin connection (e.g., Pin A1 to Pin A1, Pin A2 to Pin A2, etc.). The cables allow the module to connect to a terminal block assembly.
An I/O faceplate assembly (catalog number IC693ACC334) is required, which snaps onto the module in place of its standard 20-pin terminal block. There are five different terminal blocks available to support various I/O modules. For more details on the TBQC assemblies, see Appendix J.
Cable Specifications:
Cable Lengths:
IC693CBL321: 3 feet (1 meter)
IC693CBL322: 6 feet (2 meters)
IC693CBL323: 1.5 feet (0.5 meters)
Cable Type: 12 twisted pairs with an overall aluminum polyester shield and a #24 AWG drain wire.
24-pin Female Connectors: Equivalent to Fujitsu FCN-363J024 or equivalent.
The connectors are arranged on the I/O faceplate with rows labeled A1-A12 and B1-B12. A1 and B1 are located at the top of the module faceplate.
+ IC693CBL321 User manual (pdf)
>> Ge fanuc 90-30 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)