IC693CBL310

The IC693CBL310 cable is obsolete and has been replaced by the IC693CBL327 and IC693CBL328 cables. This 10 feet (3 meter) I/O interface cable connects to one of the 24-pin connectors on the module, with stripped, tinned, and labeled leads on the other end. The IC693CBL310 was first replaced by IC693CBL315, which also became obsolete later. Two cables are required per module.


Supported High-Density (32-point) I/O Modules:

    IC693MDL654
    IC693MDL655
    IC693MDL752
    IC693MDL753

Function of the Cable:

This 10 feet (3 meters) prewired cable was used with all Series 90-30 high-density (32-point) I/O modules that use the Fujitsu 24-pin user I/O connector. Each of these modules has two 24-pin connectors mounted side by side. The I/O interface cable has a 24-pin female connector on one end for connection to the module, and stripped and tinned wires on the other end.

    The right-side connector (front view) of the module interfaces with Groups A and B.
    The left-side connector interfaces with Groups C and D.

If a different length cable is needed for these modules, users can build their own cables. Instructions for building custom cables are provided in the IC693CBL315 datasheet.

Replacement and Obsolescence Information:

    The IC693CBL315 cable replaced the IC693CBL310 when it became obsolete. The only difference between the two cables is the wire color coding.
    When IC693CBL315 became obsolete, it was replaced by the IC693CBL327 and IC693CBL328 cables. The IC693CBL310/315 cables had straight connectors, while the IC693CBL327/328 cables have right-angle connectors. These right-angle connectors reduce the depth required in front of the PLC, allowing for the use of smaller enclosures in some applications.

The newer cables are designed to provide easier connections and are more suitable for compact spaces due to the reduced clearance requirements in front of the PLC.



+  IC693CBL310 User manual (pdf)

>> Ge fanuc 90-30 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693CBL310 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."