IC693CBL308
The IC693CBL308 is a 3 feet (1 meter) long I/O cable designed for high-density (32-point) I/O modules with a 50-pin connector on the module faceplate. The other end of the cable features stripped, tinned, and labeled leads for easy connection to terminal blocks or I/O field devices. This cable is compatible with the following 32-point modules:
IC693MDL652
IC693MDL653
IC693MDL750
IC693MDL751
IC693CBL308 I/O Cables (50-Pin) for 32-Point Modules:
This cable is used with 32-point high-density modules that have a 50-pin Honda connector mounted on the front of the module. The I/O cables have a 50-pin female Honda connector on one end, and stripped and tinned wires on the other. Each stripped and tinned wire has a label that corresponds to the pin number on the connector for easy identification and connection.
Specifications:
Cable Length:
IC693CBL308: 3 feet (1 meter)
IC693CBL309: 6 feet (2 meters)
Connectors:
50-pin female Honda connector connects to the male connector on the module.
The other end has stripped and tinned labeled wires for easy connection to terminal blocks or I/O devices.
Wiring Information:
Each wire in the cable is color-coded and labeled for easy identification. Below is an example of the wiring scheme:
Connector Pin Number Color Code Label Number Loose End
1 Black 1
2 Brown 2
3 Red 3
4 Orange 4
5 Yellow 5
6 Green 6
7 Blue 7
8 Violet 8
9 Gray 9
10 White 10
Usage:
The IC693CBL308 cable is used to connect the 50-pin Honda connector on high-density I/O modules to terminal blocks or I/O devices. It is particularly useful in installations where the wiring must pass through conduit too small for a connector. For custom-length cables longer than 6 feet, refer to the IC693CBL308/309 datasheet for pin-out details and instructions for building custom cables.
This cable ensures reliable and easy connections to high-density I/O modules, providing flexibility and functionality for various system installations.
+ IC693CBL308 User manual (pdf)
>> Ge fanuc 90-30 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)