IC693CPU364

Ge Fanuc 90-30 PLC IC693CPU364 - Simple Guide for Electricians

Overview: The IC693CPU364 is a single-slot CPU module with an embedded Ethernet interface. It supports a total of 8 baseplates (1 CPU baseplate + 7 expansion or remote baseplates). The built-in Ethernet connectivity makes networking simpler and faster, making it ideal for large projects.

Key Features:

  • Single-Slot CPU Module: The CPU occupies just one slot on the baseplate, leaving other slots available for I/O or option modules.
  • Embedded Ethernet Interface: With built-in Ethernet, the device can connect directly to the network via 10BASE-T or AAUI. An external transceiver may be needed for AAUI.
  • Battery-Backed Clock: The CPU includes a battery-backed clock, allowing it to retain time-based data even when the system is powered off.
  • Built-in Serial Port: There is 1 built-in serial port supporting SNP and SNPX slave protocols. For master or RTU support, a CMM or PCM module is required.

Technical Details:

  • Processor Speed: Operates at 25 MHz, providing fast and powerful performance.
  • Scan Rate: Scans at 0.22 milliseconds per 1K of logic.
  • User Memory: Provides 240K bytes of memory, configurable based on %R, %AI, and %AQ word memory types.
  • Input/Output Points: Supports 2,048 discrete input points and 2,048 discrete output points.
  • Internal Coils: Includes 4,096 bits for internal coils and 256 bits for temporary output coils.
  • Analog Inputs/Outputs: Configurable up to 16,384 words for analog inputs and outputs.
  • Timers/Counters: More than 2,000 timers and counters are available.
  • Communications: In addition to the built-in Ethernet, the CPU supports LAN modules for Genius, Profibus, and FIP.
  • Floating Point Math Support: Firmware-based floating-point math calculations are supported.

Things to Watch Out For:

  • Ethernet Connectivity: Direct 10BASE-T connection is available, but AAUI requires an external transceiver.
  • Memory Storage: Supports both RAM and Flash memory, with configurable memory starting from firmware version 9.0.
  • Additional Modules May Be Needed: You’ll need a CMM module for SNP/SNP-X master, RTU slave, or CCM support, and a PCM module for RTU master support.

The IC693CPU364, with its embedded Ethernet interface, simplifies networking for large projects. With high memory capacity, fast processing, and expansion support, it’s a powerful and flexible solution for managing complex systems.


>> IC693CPU364 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693CPU364 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."