IC693CPU350

Ge Fanuc 90-30 PLC IC693CPU350 - Simple Guide for Electricians

Overview: The IC693CPU350 is a single-slot CPU module designed for larger systems, offering high processing speed and extensive I/O capacity. It supports a total of 8 baseplates (1 CPU baseplate + 7 expansion or remote baseplates), making it ideal for complex operations with its large memory capacity and fast processor.

Key Features:

    Single-Slot CPU Module: The CPU occupies just one slot on the baseplate, leaving the other slots available for I/O or option modules.
    Expansion Support: You can connect up to 7 additional baseplates, providing plenty of room for system expansion, making it perfect for larger systems.
    Battery-Backed Clock: This model includes a battery-backed clock, allowing it to retain time-based data even when the system is powered off.
    Built-in Serial Port: There is 1 built-in serial port that supports SNP and SNP-X slave protocols. For master support or other protocols like RTU, you'll need a CMM or PCM module.

Technical Details:

    Processor Speed: Runs at 25 MHz, making it fast and powerful.
    Scan Rate: It scans at 0.22 milliseconds per 1K of logic.
    User Program Memory: Offers up to 32K bytes of program memory.
    Input/Output Points: Supports 2,048 discrete input points and 2,048 discrete output points.
    Internal Coils: Includes 4,096 bits for internal coils and 256 bits for temporary output coils.
    Analog Inputs/Outputs: Supports 2,048 words of analog input and 512 words of analog output.
    Timers/Counters: Provides more than 2,000 timers and counters, which is ideal for large and complex operations.
    Communications: Supports multi-drop connections via LAN, as well as Ethernet, Profibus, FIP, and other communication modules.
    Floating Point Math Support: Starting from firmware release 9.0, it supports firmware-based floating-point math calculations.

Things to Watch Out For:

    Memory Storage: It supports both RAM and Flash memory for secure program storage.
    Additional Modules May Be Needed: If you need SNP/SNP-X master, CCM, or RTU protocol support, you’ll need to add a CMM or PCM module.

The IC693CPU350 is a powerful CPU for large projects, offering high processing speed and extensive I/O capacity. With its large memory, battery-backed clock, and flexible communication options, it’s perfect for handling complex tasks and system expansions.

>> IC693CPU350 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693CPU350 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."