IC693CPU313

Ge Fanuc 90-30 PLC IC693CPU313 - Simplified Guide for Electricians

Overview: The IC693CPU313 is one of the embedded CPUs. This means that the CPU is soldered onto the baseplate and cannot be replaced. It's not as flexible as modular systems, but for simple applications, it gets the job done. If you're working on a smaller system with up to 5 slots, this model is a solid choice.

Key Features:

    Non-Replaceable CPU: The CPU is soldered onto the baseplate, meaning if it fails, you'll need to replace the entire baseplate, not just the CPU.
    No Expansion Support: This CPU does not support expansion or remote racks. If your application needs more than 10 modules, you'll need to switch to a modular CPU system.
    Slots: The IC693CPU313 has 5 slots, which can all be used for I/O or option modules since there's no need for a plug-in CPU module.
    Backup Battery: The memory backup battery is located in the power supply module. If you remove the power supply or the battery dies, the memory circuits will disconnect. Fortunately, there's a "super capacitor" that can hold enough charge to maintain memory for a short time.
    No Time-of-Day Clock: This CPU doesn’t have a built-in clock. If you don’t need time-stamped data, that’s fine, but it might be a limitation for more advanced uses.

Technical Details:

    Processor Speed: Runs at 10 MHz, which is good enough for most basic applications.
    Scan Rate: It scans at 0.6 milliseconds per 1K of logic (for boolean contacts). This speed is adequate for simple logic operations.
    User Program Memory: Offers up to 12K bytes of memory, doubled from the previous 6K in older versions.
    Input/Output Points: Supports up to 160 input points and 160 output points (total 160 combined).
    Internal Coils: Provides 1024 bits for internal coils, and 256 bits for temporary output coils.
    Analog Inputs/Outputs: Can handle 64 words of analog input and 32 words of analog output.
    Timers/Counters: You get 170 timers and counters to work with.
    Built-in Serial Port: Has 1 built-in serial port using the power supply connector. It supports SNP and SNP-X slave protocols.
    Communications: Supports Ethernet, Profibus, and other communication modules. You can also set up a LAN with multi-drop connections.

Things to Watch Out For:

    No Battery-Backed Clock: There’s no battery-backed clock for time-sensitive data, so keep that in mind if your system relies on time stamps.
    Memory Storage: Uses RAM memory, but you can also use optional EPROM or EEPROM for more secure storage.

This CPU is great for smaller projects, but if you need scalability or more advanced features, you might need to consider a modular system. Embedded CPUs are simple and reliable but come with some trade-offs in flexibility.

>> IC693CPU313 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693CPU313 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."