The IC693MDL751 12/24 Volt DC Positive Logic Output Module:

This module provides 32 output points arranged in four groups of eight (A1 - A8, B1 - B8, C1 - C8, D1 - D8), with two common terminals per group. It is designed to have positive logic characteristics, meaning it sources current to the load from the user common or positive power bus. The output device connects between the negative power bus and the module output.

This module is compatible with various user-supplied devices like motor starters, solenoids, and indicators. The user must supply the power to operate the field devices.

Connections:

Connections to output circuits are made using a 50-pin connector located on the front of the module. The module doesn't have LED indicators for output status.

Key Specs:

    Rated Voltage: 12/24 volts DC
    Output Voltage Range: 12 to 24 volts DC (+20%, -15%)
    Outputs per Module: 32 (four groups of eight outputs)
    Isolation: 1500 volts between field side and logic side
    Output Current: 0.3 amps max per point, 2 amps max per common
    Output Voltage Drop (On-state): 0.24 volts maximum
    Off-state Leakage: 0.1 mA maximum
    On Response Time: 2 ms maximum
    Off Response Time: 2 ms maximum
    Power Consumption: 21 mA (all outputs on) from the 5-volt bus on the backplane

Wiring to Field Devices:

    Direct Method: Uses pre-wired cables with connectors on the module end and stripped wires on the other. You can buy pre-wired cables such as IC693CBL308 (1 meter) or IC693CBL309 (2 meters), or build your own.
    Weidmuller Terminal Block: You can use a Weidmuller #912263 terminal block and connect it with pre-wired GE Fanuc cables, like IC693CBL306 (1 meter) or IC693CBL307 (2 meters). These cables connect from the module to a DIN rail-mounted terminal block.

Installation:

This output module can be installed in any I/O slot of a 5-slot or 10-slot baseplate in a Series 90-30 PLC system.

Summary:

The IC693MDL751 is a positive logic output module that provides 32 output points for controlling various devices like motor starters, solenoids, and indicators. It operates at 12/24 volts DC and offers fast response times (maximum 2 ms). This module is suitable for use in industrial automation systems that require reliable, high-performance output control.

>> IC693MDL751 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc