IC693CHS399

IC693CHS399 5-Slot Remote Baseplate

    Cable Length Limitation:
        The total length of the cable interconnecting all baseplates in a system using remote baseplates must not exceed 700 feet. This ensures that communication and power signals remain stable across the system.

    CPU Dependency:
        A remote baseplate cannot function independently. It must be connected to a system containing a CPU. The CPU can reside in either a PLC or a Personal Computer equipped with a Personal Computer Interface Card.

    Isolation for Stability:
        Remote baseplates include built-in isolation between the +5V logic supply used by the I/O modules and the supply for the interface circuit associated with the I/O Bus Expansion Interface. This isolation prevents problems related to unbalanced ground conditions, improving overall system stability.

    Maximum Number of Remote Baseplates:
        The number of remote baseplates allowed in a system depends on the CPU type:
            CPUs 331, 340, 341 can support up to 4 remote baseplates.
            CPUs 350 and higher can support up to 7 remote baseplates.

    Expansion Connector:
        Each remote baseplate is equipped with a 25-pin female D-type Expansion Connector, located on the right side. This connector allows it to be connected to other baseplates, extending the system’s capacity.

    Available Sizes:
        Remote baseplates are available in two sizes:
            5-slot version (IC693CHS399)
            10-slot version (IC693CHS392)

    Intelligent Module Limitations:
        Remote baseplates do not support certain intelligent option modules. The following modules must be installed in the CPU baseplate:
            PCM (Programmable Coprocessor Module)
            ADC (Analog to Digital Converter)
            BEM330 (Bus Expansion Module)
            CMM (Communications Module)
        All other I/O and option modules can be installed in any type of baseplate, including remote baseplates.

    Compatibility with Expansion Baseplates:
        Remote baseplates share the same physical dimensions, power supply requirements, and support for I/O and option modules as Expansion baseplates, ensuring compatibility across different system configurations.

    Rack Number Selection DIP Switch:
        Each remote baseplate is equipped with a Rack Number Selection DIP switch. This switch allows the system to assign a unique rack number to the baseplate, enabling the CPU to identify and communicate with it.

General Overview of Remote Baseplates:

The IC693CHS399 5-Slot Remote Baseplate is designed to extend the capabilities of a Series 90-30 PLC system by adding additional slots for I/O and option modules in locations far from the CPU. However, it must be connected to a CPU baseplate for proper operation and communication. The built-in isolation prevents issues caused by ground imbalances, and the system can be extended to a significant distance with the 700-foot cabling limit.

>> IC693CHS399 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693CHS399 and other Ge-Fanuc modules are available for sale at Otomasyon AVM. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013