IC693ACC308

IC693ACC308 Front Mount Adapter Bracket for 19-Inch Rack Mounting

The IC693ACC308 adapter bracket allows for mounting a 10-slot baseplate onto the front face of a 19-inch rack, which is a common size for industrial rack systems. It provides a secure way to install the baseplate within standardized rack units.


Dimensions:

   Width: The total width of the baseplate mounted using the adapter bracket is 18.89 inches (480 mm).
   Rack Width: The internal mounting width for the rack is 18.47 inches (469 mm). These dimensions are standard for 19-inch rack installations, ensuring compatibility with other equipment mounted in the same rack.

Installation Process:

   Mounting the Adapter Bracket: The adapter bracket is installed by inserting the tabs on the top and bottom of the bracket into the corresponding slots on the top and bottom of the plastic baseplate cover. This allows the bracket to hold the baseplate securely in place.
       Note: The plastic baseplate cover does not need to be removed during this process, though the figure may show it removed for illustration purposes.
   Securing the Baseplate: Once the bracket is in place, two screws (included with the bracket) are inserted through the back of the baseplate holes and tightened into the threaded holes in the bracket.

Warning:

    It is important to follow proper grounding instructions as outlined in Chapter 2 of the relevant manual when using these adapter brackets. Failure to properly ground the PLC can lead to malfunction, equipment damage, or even injury.

The IC693ACC308 adapter bracket provides a reliable solution for mounting baseplates in standard 19-inch racks while ensuring that the baseplate remains securely fixed and grounded for safe and effective operation.

>> IC693ACC308 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693ACC308 and other Ge-Fanuc modules are available for sale at Otomasyon AVM. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013