IC693CMM321
IC693CMM321 Ethernet Interface Module
The Ethernet Interface Module lets you hook up your Series 90-30 PLC directly to an Ethernet network, making it easier to communicate with other devices like PLCs or host computers. Think of it as a bridge between your PLC and the world of Ethernet.
Here’s the cool part: This module has client/server capability. That means your PLC can start talking to other PLCs (client mode) or just sit back and respond to requests (server mode), depending on the situation.
Key Features:
Direct Ethernet Connection: This module allows your PLC to connect directly to an Ethernet network, no extra steps needed.
Data Transfers: You can transfer data to and from other devices, and it even lets you talk to multiple devices at once—up to 16 server connections. Handy if you’re running a big setup.
Compatibility: Works with other GE Fanuc devices and even those from different brands.
Simultaneous Communication: No more waiting in line—this module handles multiple devices at the same time.
Diagnostic Tools: The module comes with tools to help diagnose issues and manage your station efficiently.
But heads up, this module doesn’t support the Series 90-30/20/Micro Hand-Held Programmer—so you’ll need to manage things using other tools.
Physical Layout:
Transceiver Port: This connects to an Ethernet network using a transceiver (check out the GE Fanuc transceiver models IC649AEA102 or IC649AEA103).
Status LEDs: There are four LEDs on top of the module—OK, LAN, SER, and STAT—that help you know what’s going on. Blinking or not, they give you quick insight into how the module is doing.
Restart Button: If you ever need to reset the module or test the LEDs, there's a Restart button right below the LEDs. Though it’s not accessible when the cover is on, so you’ll have to pop that open first.
Serial Ports: There are two serial ports—the Station Manager Port (RS-232, 6-pin RJ-11) for managing the station software, and the Downloader Port (RS-485, 15-pin D-type) for updating the firmware.
AAUI Port: This 14-pin port connects to an Ethernet-compatible transceiver via an IEEE 802.3 transceiver cable.
Indicators and Serial Numbers:
MAC Address Label: The module comes with a default MAC address label, so you know exactly how the Ethernet is identified.
Serial Number Label: This label shows the serial number of your module for identification and tracking.
For everyday use, this module makes Ethernet connections between your PLC and other devices a breeze, and it’s packed with features to keep things running smoothly. Whether you're controlling other systems or getting data in and out, the IC693CMM321 module is built for the job.
>> IC693CMM321 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)