IC693CMM302
IC693CMM302 Enhanced Genius Communications Module (GCM+)
The Enhanced Genius Communications Module (GCM+), catalog number IC693CMM302, is an intelligent module that provides automatic global data communications between a Series 90-30 PLC and up to 31 other devices on a Genius bus.
The GCM+ can be located in any standard Series 90-30 CPU baseplate, expansion baseplate, or remote baseplate. However, for most efficient operation, it is recommended to install the module in the CPU baseplate, as the sweep impact time of the GCM+ module depends on the PLC model and the baseplate where it is located.
Note: If a GCM module is present in a system, GCM+ modules cannot be included in that system.
Multiple GCM+ modules can be installed in a Series 90-30 PLC system, with each GCM+ having its own Genius bus serving up to 31 additional devices. For example, a Series 90-30 PLC with three GCM+ modules can exchange global data with up to 93 other Genius devices automatically. In addition to basic global data exchange, the GCM+ module supports various applications such as:
- Data monitoring by a personal computer or industrial computer.
- Monitoring data from Genius I/O blocks (although it cannot control Genius I/O blocks).
- Peer-to-peer communications among devices on the bus.
- Master-slave communications among devices on the bus (emulates remote I/O).
The Genius bus connects to the terminal board on the front of the GCM+ module.
Status LEDs
The LEDs on the front of the GCM+ indicate its operating status:
OK: Shows the status of the GCM+ module. This LED turns on after power-up diagnostics are completed.
COM: Shows the status of the Genius communications bus. This LED is steadily on when the bus is operating properly. It blinks for intermittent bus errors and is off for a failed bus or when no configuration has been received from the PLC CPU.
+ IC693CMM302 User manual (pdf)
>> Ge fanuc 90-30 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)