IC693BEM340

IC693BEM340 FIP Bus Controller (FBC) Module

The Series 90-30 PLC FIP (Factory Instrumentation Protocol) Bus Controller, catalog number IC693BEM340, is used to interface a FIP I/O serial bus to a Series 90-30 PLC.

Example of FIP I/O System Configuration
A FIP bus is primarily used for I/O control, storing configuration data, and reporting faults. Devices that can be connected to a FIP bus in a Series 90-30 PLC system include:

  • Series 90-70 PLC, interfaced to a FIP bus by a FIP Bus Controller.
  • Field Control Stations, which are Field Control I/O modules interfaced via a FIP Bus Interface Unit (BIU).
  • Remote Drops, Series 90-30 I/O racks interfaced to the bus via FIP Remote I/O Scanner Modules, each supporting main and expansion racks with discrete and analog I/O modules.
  • Generic Devices, such as general-purpose computers interfaced to the bus via a FIP Interface Module.

The FIP Bus Controller is a standard, rack-mounted Series 90-30 PLC module that easily plugs into the backplane. The latch on the bottom of the module secures it in position.

There are no DIP switches or jumpers to set on the module.

Status LEDs
The 6 LEDs on the front of the FIP Bus Controller display the module status and communication activity.

Serial Port
The 15-pin serial port is used for connecting a computer to upgrade the operating firmware of the Bus Controller and to configure it using an external configuration tool.

FIP Bus Connectors
The two 9-pin connectors on the FIP Bus Controller allow for connection of one or two FIP busses, providing redundant bus capability.

+  IC693BEM340 User manual (pdf)

>> Ge fanuc 90-30 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693BEM340 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."