GD5000 / Goodrive5000

GD5000 / Goodrive5000

GD5000 (Goodrive5000) is a plant-scale speed-control system for high-voltage induction or synchronous motors. The manufacturer's GD5000 profile describes cascaded power cells, sensorless-vector and vectorised V/f control. It serves large fans, pumps, compressors and conveyors, not the same cabinet class as low-voltage Goodrive units.

System architecture

INVT's profile gives 30-pulse input rectification for a 6 kV arrangement and 48-pulse rectification for a 10 kV arrangement. The selected voltage class, power cells and bypass scheme depend on the installed transformer and project. CHH100 is a separate older family in this voltage field; its parameters and cells are not assumed equivalent.

Service and replacement

Record motor and supply ratings, cell count and codes, cooling and bypass wiring. A power figure published for one power-plant or mining project is not the rating of another GD5000 cabinet.

Software and connectivity

INVT lists GD5000 among the ranges supported by INVT Studio monitoring software over Ethernet. It reads, compares and monitors drive parameters. See INVT VFD Software for its role; check the installed port and firmware before connecting.

Manuals and documents

Find the documentation topics for this equipment group on INVT VFD Documents.

Use INVT user manuals, checking the complete model code.