GD35 / Goodrive35
GD35 / Goodrive35
GD35 (Goodrive35) is a vector drive for motor axes needing speed or torque feedback. INVT's milling-machine case describes V/f, sensorless-vector and PG/encoder-based vector modes. Its high-speed spindle example reaches 8,000 rpm on one selected machine; that is not a universal GD35 speed rating.
What feedback changes
A PG card and encoder enable closed-loop speed control on axes sensitive to speed variation. An installation without encoder feedback cannot be run in the same closed-loop mode merely by copying parameters; select the card, encoder supply, screened cable and motor data together. GD35-07 is a dedicated winding/tension branch.
Selection and service
Identify the complete power code, motor nameplate, PG card and controller speed command. The milling case highlights interference affecting a high-speed pulse command, making the installed grounding and input arrangement worth checking.
Software and connectivity
INVT lists GD35 among the ranges supported by INVT Studio monitoring software over serial connection and Ethernet. It reads, compares and monitors drive parameters. See INVT VFD Software for its role; check the installed port and firmware before connecting.
Manuals and documents
Find the documentation topics for this equipment group on INVT VFD Documents.
Use INVT user manuals, checking the complete model code.