GD200 / Goodrive200

GD200 / Goodrive200

GD200 (Goodrive200) is a general-purpose V/f-oriented drive for induction motors. INVT's GD200 product profile describes motor-parameter identification, a built-in C3 filter, independent air duct and a keypad that can copy parameters. This older GD200 is not the same range as newer GD350 or GD200A.

Hardware and braking

INVT lists an integrated brake unit for 1.5–30 kW GD200 frames; do not assume the same hardware on larger frames. Common-DC-bus and DC-supply arrangements also appear in the product profile, but require the project's own wiring design. Wall, flange and floor mounting depend on frame size.

Application checks

For pumps, fans and general machines, read the motor nameplate, protection and braking demand. GD200-01 is an older INVT code for a photovoltaic pump drive; do not project its DC-source and pump functions onto the standard GD200.

Software and connectivity

INVT lists GD200 among the ranges supported by INVT Studio monitoring software over serial connection. It reads, compares and monitors drive parameters. See INVT VFD Software for its role; check the installed port and firmware before connecting.

Manuals and documents

Find the documentation topics for this equipment group on INVT VFD Documents.

Use INVT user manuals, checking the complete model code.