FRENIC-eFIT

FRENIC-eFIT: a Fuji drive for demanding environments

FRENIC-eFIT is a Fuji Electric inverter designed to control motor speed while protecting its own electronics in dusty, wet or corrosive surroundings. Unlike an open-frame general-purpose drive, it uses a sealed metal enclosure without a cooling fan. It is a complete motor drive, not a PLC, servo motor or empty protective box.

Enclosure and cooling

Fuji Electric’s technical paper identifies an IP55 enclosure, natural cooling and an all-SiC power module. Removing the fan reduces the need to move dirty ambient air past electronic components. The paper discusses indoor and outdoor use, but the actual chemical exposure, sunlight, temperature, cable glands and cleaning process still have to fit the installation instructions.

Read the rating from the unit

The 37 kW / 400 V unit pictured in Fuji’s paper is a technical example, not the rating of every eFIT drive. The same paper gives 50 °C ambient operation without output reduction and a design-life figure for that design. Check the exact FRN/EF1 nameplate and its corresponding manual for the installed unit’s input voltage, motor rating and output current.

Maintenance and replacement

Matching kW alone is not enough when replacing a sealed drive. Compare environmental protection, motor current, supply class, cable entries, braking, control terminals and any communications option. FRENIC-eFIT EF1 covers the EF1 model branch; Fuji VFD shows the other Fuji drive families. See Fuji VFD software for parameter tools and drive documents for the appropriate manual title.


Refine Search