S8
MONITOUCH S8: an earlier Fuji/Hakko HMI family
MONITOUCH S8 is a Fuji/Hakko operator-panel family used to display machine status, issue commands and view alarms. For a replacement, physical size is only one factor: resolution, display type, communication ports and project files matter. The Fuji HMI section separates other MONITOUCH generations.
S806C and S806M are different displays
Fuji/Hakko specifies the S806C as a 5.7-inch, 320 × 240, 256-colour STN panel with COM1 RS-422/485 and COM2 RS-232C. The S806M is an 8-shade monochrome variant at the same resolution. The S806C colour figure must not be carried over to S806M. The exact suffix matters.
Before replacing an installed panel
Preserve the source project, PLC communication protocol, cable pinout and panel supply details. Do not assume a colour project will have the same appearance on a monochrome panel or that a different COM port uses the same cable. Older screen projects also need the right V-SFT or Smart Editor workflow. Panel manuals sit in HMI documents; communications titles sit in HMI connection documents.
Find mounting and communication parts in HMI accessories. Replacing an S8 with another generation also calls for project-transfer and PLC-link testing.