IC694MDL645

IC694MDL645: 24 Volt DC Input Module

The IC694MDL645 is a 24-volt DC input module providing 16 input points grouped under a common power input terminal. This module can be wired for either positive or negative logic, giving flexibility for various applications. It is compatible with a wide range of input devices, including pushbuttons, limit switches, and electronic proximity switches. When current flows into an input point, it results in a logic "1" in the input status table (%I).

External power must be supplied to operate field devices. Depending on the needs of the input devices, they can also be powered using the module's +24V OUT and 0V OUT terminals. The module includes 16 green LEDs to display the ON/OFF status of input points 1 through 16. The blue bands on the label indicate that the IC694MDL645 is a low-voltage module. It can be installed in any I/O slot of an RX3i system.
Technical Specifications:

   Rated Voltage: 24 volts DC
   Input Voltage Range: 0-30 volts DC
   Inputs per Module: 16 (grouped under a single common terminal)
   Isolation:
       Field to Backplane and Frame Ground: 250 VAC continuous, 1500 VAC for one minute
   Input Current: Typically 7 mA
   Input Characteristics:
       On-state Voltage: 11.5-30 volts DC
       Off-state Voltage: 0-5 volts DC
       On-state Current: Minimum 3.2 mA
       Off-state Current: Maximum 1.1 mA
       On Response Time: Typically 7 ms
       Off Response Time: Typically 7 ms
   Power Consumption:
        80 mA from the 5-volt bus (with all inputs on)
        125 mA from the isolated 24-volt backplane bus or user-supplied power

Wiring:

   Terminals:
       Terminal 1 is the common return for inputs 1-16.
       Terminals 2-17 are for input connections.
       Terminal 18 provides 24V DC output for input devices, and Terminal 19 provides 0V.
   Note: If the 24V OUT pin is used to power input devices in the field, the isolation specification changes to:

       Field to Backplane and Frame Ground: 50 VAC continuous, 500 VAC for one minute.

The IC694MDL645 is a versatile 24-volt DC input module with 16 input points, capable of handling both positive and negative logic. It is ideal for managing DC input devices in various industrial environments. The module's low-voltage operation, combined with its compatibility with a range of input devices, makes it a flexible and reliable choice for many applications.

>> IC694MDL645 input modules User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC694MDL645 input modules and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."