IC694ACC300
IC694ACC300: Input Simulator, 8/16 Point
Introducing the legendary IC694ACC300 Input Simulator, your shortcut to simulate real-world input without any of the hassle! This simulator lets you mimic the operation of 8 or 16-point discrete input modules—no field connections required! Forget cables—seriously, who needs 'em? During system setup, drop this module in place of real inputs and enjoy smooth debugging with flair.
Use it during development, or leave it installed for manual control of output devices. Whether you need 8 or 16 points, this module has your back! There’s a switch on the back of the module that lets you select the number of points. If you choose 8 points, only the first 8 toggle switches on the front will be active.
Speaking of toggle switches, these simulate discrete input devices. When you flip a switch to ON, it sends a logic 1 to your input table (%I)—no questions asked! Plus, you’ve got green LEDs right on the front panel to show the ON/OFF status of each switch at a glance.
This module fits into any I/O slot of the RX3i system, offering flexibility and seamless integration into your setup. Let's be honest—why deal with the complexities of real-world input when this simulator lets you control it all?
Specifications:
Inputs per Module: 8 or 16 (switch selectable)
Off Response Time: 20 milliseconds max
On Response Time: 30 milliseconds max
Internal Power Consumption: 120 mA (with all inputs ON) from the 5-volt backplane bus
With the IC694ACC300, you're running a simulation so real that even reality might get a little jealous!
>> IC694ACC300 input modules User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)