IC695CPU320

IC695CPU320 Technical Specifications

The IC695CPU320 is a powerful CPU model running at 1 GHz, ideal for high-performance applications and designed specifically for the PACSystems RX3i platform.

Serial Ports

This CPU is equipped with two independent serial ports. These ports, located on the front of the module, provide communication with external devices. Either port can be used for firmware upgrades or serial communication. (For detailed pin assignments and serial communication information, refer to chapter 12.)

LED Indicators

The eight LEDs on the front of the CPU display the operational status of various CPU functions. Here's what each LED indicates:

   CPU OK (Green)
       On: The CPU is functioning properly.
       Off: There's an issue with the CPU. If the RUN and OUTPUTS ENABLED LEDs are blinking, this may indicate an error code that should be reported to technical support.

   RUN (Green)
       Off: The CPU is in Stop mode.

   OUTPUTS ENABLED (Green)
       On: Output scan is enabled.
       Off: Output scan is disabled.

   I/O FORCE (Orange)
       On: An override is active on a bit reference.

   BATTERY (Red)
       On: Battery has failed or is not connected.

   SYSTEM FAULT (Red)
       On: A fatal system error has occurred, and the CPU is in Stop/Fault mode.

Technical Specifications

   Memory Capacity:
        Includes 64 MB battery-backed RAM and 64 MB non-volatile flash memory.

   Power Requirements:
        +3.3 VDC: 1.0 Amps nominal
        +5 VDC: 1.2 Amps nominal

   Operating Temperature:
        0°C to 60°C (32°F to 140°F)

   Execution Speed:
        Typical Boolean execution time: 0.047ms per 1000 contacts/coils.

   Embedded Communication Protocols:
        Supports RS-232 and RS-485.
        Compatible with Modbus RTU Slave, SNP, and Serial I/O protocols.

   Program Blocks:
        Supports 512 program blocks, with each block having a maximum size of 128KB.

   Battery Use:
        With the IC693ACC302 Auxiliary Battery Module, memory retention lasts up to 30 days at 20°C. (Note: The IC698ACC701 Lithium Battery Pack is not compatible with this model.)

   Memory:
        %I and %Q: 32Kbits for discrete
        %AI and %AQ: configurable up to 32Kwords
        %W: configurable up to the maximum available user RAM
        Managed memory (symbolic and I/O variables combined): configurable up to 64 MB.

Battery Maintenance

To ensure RAM memory data is preserved, regular battery maintenance is recommended. The IC693ACC302 Auxiliary Battery Module can provide long-term backup for extended memory retention.

>> GE Fanuc IC695CPU320 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC695CPU320 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."