IC695CPU310

IC695CPU310 Technical Specifications

The IC695CPU310 is a powerful CPU model running at 300 MHz, designed specifically for PACSystems RX3i. It offers reliability and performance, making it an ideal choice for automation systems.

Serial Ports

The IC695CPU310 comes equipped with two independent serial ports. These ports, located on the front of the module, allow communication with external devices. Both ports can be used for firmware upgrades or serial communication with other devices. (For detailed pin assignments and serial communication information, refer to chapter 12.)

LED Indicators

The eight LEDs on the front of the CPU display the operational status of various CPU functions. Here’s what they indicate:

   CPU OK (Green)
       On: The CPU has passed power-up diagnostics and is functioning properly.
       Off: There's a problem with the CPU. If RUN and OUTPUTS ENABLED LEDs are blinking, this indicates an error code that should be reported to technical support.

   RUN (Green)
       Off: The CPU is in Stop mode.

   OUTPUTS ENABLED (Green)
       On: Output scan is enabled.
       Off: Output scan is disabled.

   I/O FORCE (Orange)
       On: An override is active on a bit reference.

   SYSTEM FAULT (Red)
       On: A fatal fault has occurred, and the CPU is in Stop/Fault mode.

Technical Specifications

   Memory Capacity:
        Includes 10 MB battery-backed RAM and 10 MB non-volatile flash memory.

   Power Requirements:
        +3.3 VDC: 1.25 Amps nominal
        +5 VDC: 1.0 Amps nominal

   Operating Temperature:
        0°C to 60°C (32°F to 140°F)

   Execution Speed:
        Typical Boolean execution time: 0.195ms per 1000 contacts/coils.

   Embedded Communication:
        Supports RS-232 and RS-485 protocols.
        Compatible with Modbus RTU Slave, SNP, and Serial I/O protocols.

   Program Blocks:
        Supports up to 512 program blocks, with each block having a maximum size of 128KB.

   Battery Life:
        The IC698ACC701 battery pack offers up to 5 years of life under typical conditions. For extended backup, the IC693ACC302 Auxiliary Battery Module can be used.

Battery Maintenance and Replacement

To ensure data in RAM memory is preserved, regular battery maintenance is recommended. Depending on the environmental conditions, battery life can vary. For example, at 20°C, the CPU’s battery lasts approximately 5 years. For long-term memory retention, the IC693ACC302 auxiliary battery module can be added.



>> GE Fanuc IC695CPU310 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC695CPU310 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."