Ge VAT2000 Vfd

Hi everyone,
The VAT2000 is a general electric AC drive with a range of 0.4 to 370kW. It is equipped with the latest technology and has a multimode drive with several control modes such as Sensorless Vector Control, Very High Performance Vector Control with Sensor, V/F, Advanced Torque Control, and PM Drive. The VAT2000 offers exceptional accuracy, response, and speed control range and has an easy-to-use rotary knob interface with autotuning for Vector Control. It also has a built-in keypad with a LED display and 8 status LEDs.

The VAT2000 is available in 3-phase systems with voltage ratings of 200-230V 50/60Hz and 380-480V 50/60Hz. It is suitable for use with CT motors from 0.4 to 315kW and VT motors from 0.75 to 370kW. The drive has a protection degree of IP20 for drives up to 15KW and IP00 for drives from 22KW to 315kW.
The main circuit of the VAT2000 uses IGBT and IPM with a sine-wave PWM inverter. The drive has a frequency range of 0-440Hz with a frequency accuracy of +0.01% in digital settings and ±0.1% in analog settings. It has a multi-mode high-performance Vector drive control system with a speed range of 1:20 in V/F ATC mode, 1:100 with a speed accuracy of ±0.5% in Sensorless Vector mode, and 1:1000 with a speed accuracy of ±0.01% in Sensor Vector mode.
The VAT2000 has several operating commands such as Run Forward and Reverse and Jog, and stopping systems such as ramp down or coast to stop, independently selectable for RUN, JOG, and EM stop. It also has DC Braking and Dynamic Braking, as well as various protections such as Overload, Overcurrent, Overvoltage, Undervoltage, Ground fault, Overtemperature, etc. The VAT2000 is CE, IEC, and UL compliant and has up to 14 different faults with 44 sub-codes.
+ Ge Vat2000 User manual (pdf)
+ Ge VAT2000 VFD User manual >>
+ General Electric 2. Main page >
+ VFD Homepage >