eTOP Classic
eTOP Classic occupies a distinct place among Exor / UniOP panels through its display, operator controls and software generation. On classic eTOP panels, retain EB and C suffixes and the distinction between the legacy 05 and later generations. For replacement, review cut-out, ports and project software together.
The family includes models such as eTOP05, eTOP10, eTOP11, eTOP12, eTOP30. They should be read as distinct hardware references: a change in display, input method, connection or revision can affect both the installed project and the panel cut-out.
What matters on the installed machine?
eTOP Classic includes choices such as eTOP05 and eTOP10. The first examples differ in 5.7 inch; 320×240; legacy LCD/TFT generation; verify exact hardware and 5.7 inch TFT; 320×240.
Check the project backup, cable arrangement and operator workflow against the exact member of eTOP Classic. Sharing a family name does not establish the same cabinet cut-out or software target.
Record the current display behavior before changing eTOP Classic. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.
Around eTOP Classic, compare eTOP11 (5.7 inch STN colour; 320×240), eTOP12 (5.7 inch monochrome LCD; 320×240) and eTOP30 (10.4 inch TFT; 640×480). Check each complete code and connection on its own page.
PDF manuals
Documents include UniOP Installation Guide v1.09, EXOR 2015 archive catalogue. For eTOP Classic, match the full code and hardware period against eTOP Classic PDF Manuals.