PLCM06
PLCM06 belongs to JMobile-Generation Modules and serves as PROFIBUS-DP slave communication module. Its role depends on the host-panel generation and the connection actually used in the cabinet.
For PLCM06, check PROFIBUS-DP slave communication module against the exact host-panel configuration. Match its complete code, port and option slot to that installation.
What matters on the installed machine?
PLCM06 serves as PROFIBUS-DP slave communication module. Check the actual connector or mounting position and the host-panel generation before selecting it.
Compare PLCM06 (PROFIBUS-DP slave communication module) with PLCM01 (CAN communication module); similar connectors do not establish the same duty. Test the function after installation on the running system.
Before changing PLCM06, record its connector position and the function it provides to the host panel. Test that function after installation with the original communication or mounting arrangement.
For PLCM06, confirm that the host supports PROFIBUS-DP slave communication module. Match the part code with the host’s option or mounting requirements. PLCM01 may serve another function despite a similar connector. For PLCM06, check the PROFIBUS-DP slave role, eX700 slot, firmware and the station settings on the installed network.
Around PLCM06, compare PLCM02 (KNX / EIB TP communication module), PLCM03 (RS-232 communication module) and PLCM04 (isolated RS-422 / RS-485 communication module). Check each complete code and connection on its own page.
PDF manuals
Documents include EXOR 2015 archive catalogue. For PLCM06, match PROFIBUS-DP slave communication module details against JMobile-Generation Modules PDF Manuals.