eX707FB

eX707FB is the 7 inch; 800×480; PCAP operator panel in the eX700 Hygienic family. Its project handles machine status, alarms and controls; replacement depends on the nameplate and connections as well as the visible screen.

The recorded display or hardware distinction for eX707FB is 7 inch; 800×480; PCAP. The complete order code is +EX707U4F1; retain all suffixes. Match the supply, port layout and cabinet cut-out of eX707FB against its nameplate and technical drawing. Compare connector orientation and mounting dimensions with the installed panel.

In the hygienic eX700 class, eX707FB is mechanically distinct from the standard eX707. Front IP69 and rear IP20 conditions must be evaluated with mounting and wash-down environment. Use the complete eX707FB code when selecting within this family.

For eX707FB, assess the exposed front separately from the rear connection area. Compare cabinet sealing, cable exit and the reach of cleaning procedures with the protection boundaries shown in the installation drawing.

What matters on the installed machine?

eX707FB has the recorded 7 inch; 800×480; PCAP arrangement; check that the operator screens fit this display. Compare the adjacent panel layout before substitution. Matching a plug does not preserve the operator’s screen and key layout.

For eX707FB, verify the JMobile Studio release, protocol option and whether the archived project opens.

Record the current display behavior before changing eX707FB. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.

PDF manuals

Documents include eX707FB technical sheet v1.5. For eX707FB, match 7 inch; 800×480; PCAP details against eX700 Hygienic PDF Manuals.