eTOP607M
eTOP607M is the 7 inch; 800×480; PCAP operator panel in the eTOP600 family. Its project handles machine status, alarms and controls; replacement depends on the nameplate and connections as well as the visible screen.
The recorded display or hardware distinction for eTOP607M is 7 inch; 800×480; PCAP. Match the supply, port layout and cabinet cut-out of eTOP607M against its nameplate and technical drawing. Compare connector orientation and mounting dimensions with the installed panel.
eTOP600 is a JMobile-generation projected-capacitive touch-panel family. Preserve the 605 slot arrangement and the 607M suffix during selection; equal screen size can still hide a different connection layout. Use the complete eTOP607M code when selecting within this family.
What matters on the installed machine?
eTOP607M has the recorded 7 inch; 800×480; PCAP arrangement; check that the operator screens fit this display. Compare eTOP605 (5 inch; 800×480; PCAP) before deciding on a substitute. Matching a plug does not preserve the operator’s screen and key layout.
For eTOP607M, verify the JMobile Studio release, protocol option and whether the archived project opens. A related code such as eTOP605 does not establish the same software target.
Record the current display behavior before changing eTOP607M. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.
For eTOP607M, compare the display and hardware details on eTOP605 and eTOP610. Check the suffix, port layout and cabinet cut-out of each family member against the installed device.
PDF manuals
Documents include EXOR 2015 archive catalogue. For eTOP607M, match 7 inch; 800×480; PCAP details against eTOP600 PDF Manuals.