eTOP32
eTOP32 is an operator panel identified by its complete hardware code in the eTOP Classic family. Its project handles machine status, alarms and controls; replacement depends on the nameplate and connections as well as the visible screen.
Match the supply, port layout and cabinet cut-out of eTOP32 against its nameplate and technical drawing. Compare connector orientation and mounting dimensions with the installed panel.
On classic eTOP panels, retain EB and C suffixes and the distinction between the legacy 05 and later generations. For replacement, review cut-out, ports and project software together. Use the complete eTOP32 code when selecting within this family.
What matters on the installed machine?
The display arrangement of eTOP32 must be checked on the installed nameplate and front panel. Compare eTOP05 (5.7 inch; 320×240; legacy LCD/TFT generation; verify exact hardware) before deciding on a substitute. Matching a plug does not preserve the operator’s screen and key layout.
For eTOP32, verify the Designer / Designer 6 release, protocol option and whether the archived project opens. A related code such as eTOP05 does not establish the same software target.
Record the current display behavior before changing eTOP32. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.
Around eTOP32, compare eTOP10 (5.7 inch TFT; 320×240), eTOP11 (5.7 inch STN colour; 320×240) and eTOP12 (5.7 inch monochrome LCD; 320×240). Check each complete code and connection on its own page.
PDF manuals
Documents include UniOP Installation Guide v1.09, EXOR 2015 archive catalogue. For eTOP32, match the full code and hardware period against eTOP Classic PDF Manuals.