eTOP05EB

eTOP05EB is the 5.7 inch monochrome TFT; 320×240 operator panel in the eTOP Classic family. Its project handles machine status, alarms and controls; replacement depends on the nameplate and connections as well as the visible screen.

The recorded display or hardware distinction for eTOP05EB is 5.7 inch monochrome TFT; 320×240. Match the supply, port layout and cabinet cut-out of eTOP05EB against its nameplate and technical drawing. Compare connector orientation and mounting dimensions with the installed panel.

On classic eTOP panels, retain EB and C suffixes and the distinction between the legacy 05 and later generations. For replacement, review cut-out, ports and project software together. Use the complete eTOP05EB code when selecting within this family.

What matters on the installed machine?

eTOP05EB has the recorded 5.7 inch monochrome TFT; 320×240 arrangement; check that the operator screens fit this display. Compare eTOP05 (5.7 inch; 320×240; legacy LCD/TFT generation; verify exact hardware) before deciding on a substitute. Matching a plug does not preserve the operator’s screen and key layout.

For eTOP05EB, verify the Designer / Designer 6 release, protocol option and whether the archived project opens. A related code such as eTOP05 does not establish the same software target.

Record the current display behavior before changing eTOP05EB. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.

Around eTOP05EB, compare eTOP10 (5.7 inch TFT; 320×240), eTOP11 (5.7 inch STN colour; 320×240) and eTOP12 (5.7 inch monochrome LCD; 320×240). Check each complete code and connection on its own page.

PDF manuals

Documents include UniOP Installation Guide v1.09, EXOR 2015 archive catalogue. For eTOP05EB, match 5.7 inch monochrome TFT; 320×240 details against eTOP Classic PDF Manuals.