6ES7 193-0CE30-0XA0
6ES7 193-0CE30-0XA0 is the Siemens SIMATIC ET 200B TB4M/DC terminal block. Designed for digital electronic blocks, it features three-wire spring terminals and an additional M terminal row. This 235 mm wide component should be identified by its complete order number when maintaining or replacing parts in an existing Siemens ET 200 installation.
Device Description
The TB4M/DC holds field wiring and receives the electronic block. Its 32-channel terminal layout supports functions determined by the fitted electronics. The manual lists 32DI, 32DO, 16DI/16DO and 16DO/2A combinations. Check the base and electronics together when selecting digital inputs or digital outputs.
The base includes the PROFIBUS-DP connection, station address setting and RUN/STOP switch. Record the physical station labels alongside the existing PLC project to help prevent similar-looking components from being confused. Our PROFIBUS and PROFINET information page explains the communication terminology.
Technical Data
Manufacturer: Siemens
Order number: 6ES7193-0CE30-0XA0
System family: SIMATIC ET 200B
Designation: TB4M/DC / TB4-M/DC terminal block
Connection: Three-wire spring terminals with an additional M row
Rated supply voltage: 24 V DC
Permissible voltage range: 18.5–30 V DC, including ripple
Width: 235 mm
Protection rating: IP20
Operating ambient temperature: 0 to +60 °C
Conductor cross-section without ferrules: 0.08–2.5 mm²
Conductor cross-section with ferrules: Maximum 1.5 mm²
Supply and environmental values come from the manufacturer's product data sheet; conductor sizes come from the ET 200B system manual. Refer to the fitted electronic block for output load and channel current ratings. Include connected field loads when selecting a power supply or reviewing an existing DIN rail power supply.
Additional M Row and Wiring
The additional M1–M5 terminals serve their respective reference potentials; they must not be confused with protective earth, PE. Check the electronic block's wiring diagram before bridging groups. In an older cabinet, establish why existing bridges were fitted before transferring the arrangement to a replacement component.
Before disconnecting sensor wiring, record each terminal number, cable label and connected field device. For sensor connectors and cables, compare the actual wiring with the cabinet drawing rather than relying on conductor colours alone. Prepare conductors correctly and avoid forcing unsuitable ferrules into the terminal openings.
Installation, Inspection and Commissioning
Before installation, qualified personnel should safely isolate the station and connected field circuits. Inspect the housing for cracks, terminal openings for deformation, and contact areas for corrosion or signs of overheating. Arrange cable ducts and other control panel components so that wiring remains accessible and is not strained.
When replacing a component, photograph both the terminal base label and the electronic block label. Keep the complete order numbers, existing address setting and cable markings in the same maintenance record. Confirm whether the purchase includes the electronic block, connectors or accessories; a photograph alone does not establish the scope of supply.
During commissioning, check the supply first, then communication and field signals. Ensure the connected mechanism is safe before testing outputs. Where external relays and sockets are used, inspect the coil voltage and wiring as well. For intermittent faults, investigate terminal contact, supply continuity and any relationship with cable movement before deciding which component needs replacement.
Editor's Recommendations and Related Topics
Start a spare-part search with the complete order number. Within our ET 200 terminal block section, you can also review 6ES7 193-0CB30-0XA0 and 6ES7 193-0CA30-0XA0. These links are provided for comparison; verify compatibility in the manufacturer's documentation before choosing a substitute.
For other station components, browse the ET 200 connection modules and ET 200 communication products. Our Siemens ET 200 overview provides background information on the product family.
User Manuals and PDF Documents
+ Siemens ET 200 user manuals — PDF archive page.
+ Siemens ET 200B system manual — TB4M/DC — Section 7.2.7, printed page 7-11; PDF page 97.
+ Siemens ET 200 general catalogue archive — Use the ET 200B manual above for this model's wiring.
++ Siemens Automation Main Page
++ Siemens Automation Contact — For enquiries to Otomasyon AVM.
Reminder: Confirm current availability, condition and scope of supply for Siemens 6ES7 193-0CE30-0XA0 before purchasing. Some devices offered by Otomasyon AVM are used products; assess the individual listing and photographs accordingly. Products will not be restocked once available stock is exhausted.
Note: The information, commissioning suggestions and documents on this page are provided for general guidance, are non-binding and may be updated. For definitive application details, consult the device label, the fitted electronic block's documentation and the manufacturer's manual. The Otomasyon AVM Community welcomes practical feedback. You can share your operating experience with us.