6ES7 171-2AA00-0AA0
6ES7 171-2AA00-0AA0 – Siemens LA724 Heating Control Power Output Module
Series: Siemens SIMATIC HS 724 / LA 724
Category: Heater power output module
Description and system role
6ES7 171-2AA00-0AA0 is a Siemens LA 724 heating control power output module. It works with the ZA 724 central interface in the HS 724 system and forms part of the power stage used to control heater loads in industrial heating applications.
When choosing a spare, review the complete order number, central interface, load ratings, connections and cabinet cooling together. Check the full suffix when comparing parts sold under the same LA724 name.
Connection to ZA724 and the PLC
In the HS 724 architecture, the ZA 724 central interface communicates with the host PLC system over PROFIBUS-DP. LA 724 power outputs connect to the ZA 724 through the 724 parallel bus.
STEP 7 GSD and software selection depend on the central interface version. Before replacing a part, record the installed ZA724 order number alongside the LA724 label and retain a backup of the machine project.
Versions and limits of the available technical data
The Siemens HS 724 manual dated 05/2001 identifies 6ES7 171-2AA01-0AA0 and 6ES7 171-2AA02-0AA0. The 2AA02 version has channel fuses accessible from the front.
The document does not identify the 2AA00 order number. Consequently, this page does not assign a confirmed channel count, load voltage, per-channel power, current limit or fuse arrangement to that version. Verify these details against the 2AA00 product label and documentation for the appropriate revision. Interchangeability with 2AA01 or 2AA02 also requires confirmation.
Fault investigation and inspection of a used unit
When a heating zone fails to warm up, examine the heater, wiring, associated fuses and control command together. A communication fault and a fault affecting one power output require different checks; record the symptom and any diagnostic message. Isolate the supply before inspecting connections or fuses.
On a used module, inspect the label, connectors, power terminals, heatsink and signs of overheating. Ask which outputs were tested and with what load. One working output does not establish that the remaining outputs were tested. Damaged connectors or missing connection parts can also affect the purchase decision.
Editor's Note
When sourcing an LA724 spare, include the ZA724 label, heater ratings and cabinet wiring information alongside photographs of the module. These details help establish whether a similar-looking part suits the machine. Ask for a test description identifying the outputs and load used, rather than relying on a general “working” statement.
PDF documentation and user manuals
Visit the Siemens ET 200 PDF and user manuals section for documentation. The HS 724, 05/2001 manual covers the system and later LA724 variants; STEP 7 Sample Program for HS 724, V0.4 describes the PLC connection. Neither document should be treated as the specific technical datasheet for 2AA00.
Related topics
Other heating-panel product groups include controllers, temperature sensors and SSR relays. Browse control hardware under PLC and HMI and Siemens S7 PLC.
Other module groups: ET 200 digital output modules · Function and safety modules · Special output modules · Special application product index.
Quick links: Siemens ET 200 · Siemens SIMATIC S7 · Siemens automation · OtomasyonAVM home