6ES7 193-4CG20-0AA0

Siemens Main Menu › SIMATIC S7 › ET 200 Modules

Siemens 6ES7 193-4CG20-0AA0 — ET 200S TM-E30S44-01 Terminal Module

6ES7 193-4CG20-0AA0 is the TM-E30S44-01 screw-terminal module for ET 200S, part of the Siemens ET 200 family. It provides the wiring base for compatible 30 mm electronic modules. It belongs to the ET 200 terminal block range and does not independently read inputs, drive outputs or perform weighing.

Technical characteristics

Terminal arrangement: 4×4, providing 16 connection points. Connection type: Screw terminals. Width: 30 mm. Dimensions: 30 × 132 × 43 mm (width × height × depth). Approximate weight: 125 g. These dimensions describe the terminal module; assess the completed assembly separately when planning cabinet space.

16 terminals do not mean 16 I/O channels. The fitted electronic module determines the functions of terminals 1–16. When choosing connection modules and wiring bases, terminal count alone is therefore insufficient.

Continuous AUX1 bus without terminal access

This version has a continuous AUX1 bus, but no terminal connection to the AUX1 potential. Keep these two characteristics separate when reviewing power distribution and potential groups. Internal continuity does not mean that an arbitrary field terminal can be used as an AUX1 connection.

Typical applications

Siemens specifies this terminal type for suitable 30 mm electronic modules and fail-safe safety modules. It is used in F-DI and F-DO applications, subject to the exact electronic module's compatibility requirements. The terminal base alone does not provide a safety function. PROFIsafe safety communication must be considered together with the F-module and safety controller.

A specific weighing application is SIWAREX CS. Siemens' WT 10 catalog lists this order number as a terminal option for the 7MH4910-0AA01 SIWAREX CS module. This provides a practical link between ET 200 function and technology modules and weighing and weight control devices. Measurement and calibration are performed by the SIWAREX electronics, not by the terminal base.

Five checks before selection

1. Electronic module match: Identify the complete order number of the module to be fitted. The subfamilies within the ET 200 system architecture use different components; a matching 30 mm width does not establish compatibility.

2. TM-E versus TM-P: This product is intended for electronic modules. Do not confuse it with TM-P bases for ET 200 power supply modules. In particular, 6ES7193-4CK20-0AA0 is the TM-P30S44-A0, which serves a different purpose.

3. Screw versus spring terminals: 4CG20 identifies the screw-terminal TM-E30S44-01. 6ES7193-4CG30-0AA0 is the spring-terminal TM-E30C44-01. Consider conductor preparation, connection method and the existing cabinet wiring before changing versions.

4. Terminal assignment and AUX1: Do not transfer wires solely by their physical positions. Match terminal numbers to the electronic module's wiring diagram, and do not assume this base meets an application requiring direct AUX1 terminal access.

5. Physical condition: For a used item, inspect screw threads, terminals, rear connections and locking features. Heat damage, corrosion or broken coding parts should not be overlooked. Confirm separately whether the electronic module is included in the delivery.

Editor's Note

The three key selection details are the TM-E30S44-01 designation, screw connections and absence of AUX1 terminal access. Similar-looking bases may have different internal connections. In weighing applications, distinguish wiring-base faults from calibration issues. In safety applications, distinguish terminal compatibility from validation of the safety function. Replace the terminal only after placing the machine in a safe state and isolating the relevant supplies.

PDF manuals and wiring information: Visit Siemens ET 200 user manuals and PDF documents and consult ET 200S Terminal Modules, A5E01120034-01. Section 1.13, page 28, describes the TM-E30x44-01 family's internal connections. Use the fitted electronic module's own manual for signal assignments.