6ES7 193-4CD20-0AA0
Siemens automation › SIMATIC S7 › Siemens ET 200 › TM-P15S23-A0
Siemens 6ES7 193-4CD20-0AA0 — ET 200S TM-P15S23-A0 Terminal Module
The 6ES7 193-4CD20-0AA0 is a TM-P15S23-A0 terminal base for power modules in the ET 200S series of the Siemens ET 200 distributed I/O family. It is 15 mm wide and uses screw terminals. Within the ET 200 terminal block range, its defining feature is an interrupted AUX1 bus.
Power module and terminal base roles
The TM-P15S23-A0 carries a compatible ET 200 power supply module; it is not a standalone power supply. One Siemens application example uses this base with the PM-E DC24V / 6ES7138-4CA01-0AA0. For a different power module, verify the terminal-base assignment in that module's manual.
This TM-P arrangement provides the infeed for a new potential group extending to the next TM-P base. Its position in the ET 200 power distribution arrangement matters: selecting another component of the same width does not establish that the existing electrical grouping will remain unchanged.
What does an interrupted AUX1 bus mean?
On the A0 version, AUX1 does not continue electrically to the adjacent potential group on the left. AUX1 is accessible through terminals A4 and A8. This allows the auxiliary potential to be treated separately at the group boundary. An interrupted AUX1 bus does not, however, mean that the whole station or every supply is electrically isolated.
When replacing ET 200 connection components, identify the purpose of AUX1 from the cabinet wiring diagram. Follow the documented potential arrangement rather than adding or removing bridges based on the appearance of the previous base.
Differences between CD20, CD30 and CC20
6ES7193-4CD20-0AA0 / TM-P15S23-A0: Screw terminals with an interrupted AUX1 bus. 6ES7193-4CD30-0AA0 / TM-P15C23-A0: The spring-terminal option in the same A0 family. 6ES7193-4CC20-0AA0 / TM-P15S23-A1: Screw terminals, but with an A1 arrangement that continues AUX1 to the group on the left. A0 versus A1 is more than a difference in connection method.
Terminal arrangement and dimensions
Siemens specifies 2 × 3 terminal connections with access to AUX1. Dimensions are 15 × 132 × 43 mm (width × height × depth), with an approximate weight of 65 g. Terminal count must not be interpreted as I/O channel count.
When reviewing the ET 200 station architecture, also consider the supply requirements of the digital input modules, digital output modules and analog input modules to the right of the group infeed. These category links help identify other station components; they do not mean that every listed product plugs directly into this base.
Five checks before selection or replacement
1. Full number and suffix: Confirm 6ES7193-4CD20-0AA0 and TM-P15S23-A0 on the label. Pay particular attention to the A0/A1 distinction.
2. Power module: Check the complete order number of the PM module and its compatibility with this terminal base.
3. AUX1 purpose: Compare the auxiliary potential, its supply point and the required continuity at the group boundary with the wiring diagram.
4. Terminals and contacts: Inspect screws, conductor openings and side contacts for damage, looseness or overheating. Follow the manufacturer's instructions for tightening torque and conductor preparation.
5. Scope of supply: Make the terminal base and power module separate items in the quotation. Do not assume that a PM module shown in a photograph is included.
Editor's note: Before deciding between screw and spring terminals, establish whether AUX1 must continue or be interrupted at this point. A mechanically similar but electrically different base can alter the cabinet's auxiliary potential arrangement. Record the power module number and the purpose of AUX1 alongside the terminal base number in the spare-parts record.
Manuals and PDF documents
For terminal diagrams and the A0/A1 distinction, use the Siemens ET 200 PDF and user manuals page. The relevant reference is ET 200S Terminal Modules — A5E01120034-01, section 1.3: TM-P15x23-A0. Read the terminal-base diagram alongside the manual for the power module being fitted.
Related topics
Power and connections: Power supply modules · Terminal blocks · Connection modules · Power distribution modules
Explore the station: About ET 200 · Communication interfaces · ET 200 manuals
Otomasyon AVM | Siemens:
Siemens main menu |
Siemens S7 PLC |
SIMATIC S7 |
ET 200 modules