6ES5 710-8MA11
Siemens automation › SIMATIC S7 › Siemens ET 200 › 6ES5710-8MA11
Siemens 6ES5 710-8MA11 — 35 mm Mounting Rail, 483 mm
The 6ES5 710-8MA11 is a Siemens SIMATIC steel mounting rail with a nominal length of 483 mm for 19-inch cabinets. It has a 35 mm rail profile and a depth of 15 mm. Siemens also lists this order number for ET 200S installations within the ET 200 distributed I/O family. The rail provides mechanical support for the station components.
Why do both 483 mm and 482.6 mm appear?
483 mm is the nominal length used in the product description. The Siemens technical data sheet specifies dimensions of 482.6 × 35 × 15 mm. Use the actual dimensions for panel drawings and the complete order number 6ES5710-8MA11 when identifying the product. Alongside the 19-inch cabinet designation, check the cabinet mounting surface and fixing points.
Using the rail in an ET 200S station
The rail supports ET 200 terminal bases and suitable station components. When planning the ET 200 system layout, consider mechanical support, power supply and data communication separately. Communication is handled by PROFIBUS and PROFINET interfaces; the rail itself is not a communication module.
Allow space for ET 200 power supply modules, power distribution components and ET 200 connection modules. Then calculate the width occupied by the digital input modules, digital output modules and analog input modules together with their appropriate bases. Include the space required for terminating components, mechanical restraints and maintenance access. These category pages may include several ET 200 families, so confirm ET 200S compatibility for each selected component.
Checks before selection or replacement
Order number and length: Specify 6ES5710-8MA11 in the order. If an existing rail has been cut, measure its usable length instead of relying solely on the label.
Profile and layout: Check the 35 × 15 mm profile, available panel depth, module engagement and clearance to cable ducts. Total module width alone does not fully define the installation space required.
Mechanical condition: Inspect for bending, twisting, corrosion and damaged retaining edges. Arrange fastening and grounding in accordance with the installation instructions for the system being used.
Editor's note: Before replacing a rail in an older panel, photograph and measure the existing arrangement. Matching the rail length alone does not establish that modules and cables will fit equally well. For a previously cut rail, check its actual length, fixing points and edge condition together.
Manuals and PDF documents
For installation information, visit the Siemens ET 200 PDF and user manuals page. Consult the installation chapter of ET 200S Distributed I/O System — Operating Instructions, and check the precise product dimensions against the 6ES5710-8MA11 technical data sheet.
Related topics
Power and connections: Power supply modules · Terminal blocks · Connection modules · Power distribution modules
Explore the station: About ET 200 · Communication interfaces · ET 200 manuals
Otomasyon AVM | Siemens:
Siemens main menu |
Siemens S7 PLC |
SIMATIC S7 |
ET 200 modules