6ES7 151-3BA23-0AB0
Siemens 6ES7151-3BA23-0AB0 – IM151-3 PN High Feature
The Siemens 6ES7151-3BA23-0AB0 connects an ET 200S I/O station to a PROFINET network. It sends input data to the PLC and passes the PLC’s output commands to the station’s modules. The PLC runs the control program; the IM151-3 PN HF handles communication with the distributed I/O. It belongs to the High Feature range within the Siemens ET 200 family.
Station capacity and electrical data
An ET 200S station can accommodate up to 63 I/O modules, with a maximum overall width of 2 metres. The interface provides 256 bytes of input data and 256 bytes of output data. When planning an expansion, check the address space as well as the module count: analog and specialist modules can use considerably more data than a small digital module.
The interface uses a 24 V DC supply. Maximum current drawn from 1L+ is 200 mA, with a typical power loss of 3.3 W. The 200 mA figure applies to the interface module, not the combined load of the station’s output devices. Dimensions are 60 × 119.5 × 75 mm (width × height × depth), including the mounting rail in the depth measurement.
PROFINET connections
The two RJ45 ports belong to one PROFINET interface with an integrated switch, operating at 100 Mbit/s. In a line topology, one port connects to the preceding device and the other continues the network to the next device. This can reduce the number of external switches needed along a machine or production line. See ET 200 PROFIBUS and PROFINET for an overview of the network options.
What High Feature adds
Shared Device allows modules within the same station to be assigned to different controllers. This interface supports up to two IO Controllers. For example, one PLC can own one group of modules while another PLC owns a different group. Each module’s controller assignment is defined in the project.
MRP provides an alternative communication path after a link failure in a correctly configured ring network. IRT supports applications that need precisely scheduled data exchange. The interface also supports PROFIenergy and prioritized startup. These functions require compatible controllers and an appropriate network configuration.
Check the firmware and hardware revision before using advanced features. Siemens’ August 2010 manual covers firmware V7.0 and later. It also specifies a 146-byte I/O limit for hardware revisions EZ1, EZ2 and EZ3 when using IRT “high performance”. Applying the general 256-byte capacity under those conditions can cause communication interruptions.
Commissioning and troubleshooting
Start by matching the station’s assigned PROFINET device name to the name in the PLC project. Then check the IP settings and the actual I/O module sequence. The hardware catalog entry or GSDML file must also match the interface and its firmware.
A lit LINK LED confirms a physical connection, not successful cyclic I/O communication. The cable can be connected while the device name or hardware configuration is still wrong. If BF or SF is active, use the PLC’s online diagnostics to narrow down the cause before replacing hardware. A module taken from another machine may also retain its previous network settings.
Manuals and PDF documentation
For wiring, addressing, LED indications and firmware details, visit the Siemens ET 200 user manuals page. Choose documentation covering IM151-3 PN HIGH FEATURE – 6ES7151-3BA23-0AB0. Wiring and channel-specific information for the station’s I/O modules can be found in their individual manuals.
Related topics
Inputs and outputs: Digital input modules, digital output modules, analog input modules, special input modules and special output modules.
Power and connections: Power supply modules, power distribution modules, terminal blocks and connection modules.
Specialist functions and expansion: Functional and safety modules, counter modules, positioning modules, additional modules and other network interface modules.
Safety and system information: ET 200 safety modules, ET 200 PROFIsafe and About Siemens ET 200.
Navigation: Siemens Automation | Siemens S7 PLC | SIMATIC S7 | SIMATIC ET 200