6ES7 151-1AB05-0AB0
Siemens 6ES7 151-1AB05-0AB0 – IM151-1 FO STANDARD Interface Module
The Siemens 6ES7 151-1AB05-0AB0 is an IM151-1 FO STANDARD interface module for connecting an ET 200S station to PROFIBUS DP over fibre-optic cable. It supports transmission rates up to 12 Mbit/s.
Fibre-optic connection
The interface accepts POF and PCF fibre cables and has four simplex sockets. It supports operation as a DPV0 or DPV1 slave. DPV1 operation also requires a compatible DP master.
Check both the fibre type and the connectors used by the existing network when selecting a cable. Our ET 200 PROFIBUS and PROFINET page provides further information about network connections.
Station capacity and power requirements
The interface supports up to 63 power, electronic or motor starter modules, with an address capacity of 244 input bytes and 244 output bytes. The station backplane can extend to 2 metres, subject to the installation limits of the selected modules.
The supply voltage is 24 V DC. Maximum current consumption is 200 mA, and typical power dissipation is 3.3 W. The module is 45 mm wide.
Replacing an AB02 module
Siemens identifies this model as the replacement for 6ES7 151-1AB02-0AB0. However, the two versions have different terminal arrangements on the 24 V supply connector. Check the wiring against the markings on the replacement module and the connection diagram in its manual.
When sourcing a spare, match the complete 6ES7 151-1AB05-0AB0 order number. Also check the existing fibre connections and the interface selected in the hardware configuration.
User manuals and PDF documentation
Visit our Siemens ET 200 user manuals and PDF documentation page for connection diagrams, parameter settings and diagnostic information. Use the IM151-1 FO STANDARD manual for this model.
Related topics
The following links cover the wider ET 200 family. Check compatibility against each module’s order number before adding it to an existing station.
Input and output modules: Digital input modules · Digital output modules · Analog input modules · Special input modules · Special output modules
Power and connections: Power supply modules · Power distribution modules · Terminal blocks · Connection modules
Functions and expansion: Function modules · Counter modules · Positioning modules · Additional modules · Other network interfaces
Safety and system information: Safety modules · PROFIsafe · About Siemens ET 200
Categories: Siemens › Siemens S7 PLC › SIMATIC S7 › Siemens ET 200