6ES7 151-1AA01-0AB0
Siemens 6ES7 151-1AA01-0AB0 – IM151-1 STANDARD Interface Module
The Siemens 6ES7 151-1AA01-0AB0 is an IM151-1 STANDARD interface module that connects an ET 200S station to PROFIBUS DP. It uses a 9-pin Sub-D connector and supports transmission rates up to 12 Mbit/s.
Station capacity
The interface supports up to 63 power, electronic or motor starter modules. Its address capacity is limited to 128 input bytes and 128 output bytes.
When expanding a station, check the total I/O byte allocation as well as the number of modules. Available physical space alone does not determine whether an extension will fit within the station’s limits. Check each additional module’s documentation for compatibility with the AA01 interface version.
Power supply and PROFIBUS address
The module requires a 24 V DC supply. Its PROFIBUS address is set using the front DIP switches, with valid addresses from 1 to 125. Each station must have a unique address on the network, matching the address assigned in the PLC project.
See our ET 200 PROFIBUS and PROFINET page for further information about network connections.
Module arrangement at startup
An AA01 station will not start if an electronic module is missing when power is applied. The terminating module must also be fitted at the right-hand end. If communication does not start, check that the modules are fully seated and that their physical arrangement matches the hardware configuration.
A module removed during maintenance can leave a gap that prevents startup. Check for this before pursuing other faults. When selecting a replacement interface, match the complete 6ES7 151-1AA01-0AB0 order number on the label.
User manuals and PDF documentation
Visit our Siemens ET 200 user manuals and PDF documentation page for wiring, addressing and diagnostic information. Check that the instructions cover the 6ES7 151-1AA01-0AB0 version.
Related topics
Explore other parts of the ET 200 family through the categories below. These are general category links; compatibility with an existing station must be checked separately.
Input and output modules: Digital input modules · Digital output modules · Analog input modules · Special input modules · Special output modules
Power and connections: Power supply modules · Power distribution modules · Terminal blocks · Connection modules
Functions and expansion: Function modules · Counter modules · Positioning modules · Additional modules · Other network interfaces
Safety and system information: Safety modules · PROFIsafe · About Siemens ET 200
Categories: Siemens › Siemens S7 PLC › SIMATIC S7 › Siemens ET 200