Endress+Hauser

Used Endress+Hauser Measurement and Control Instruments
Browse used Endress+Hauser equipment in this section. Endress+Hauser offers instruments for process measurements including pressure, level, flow, temperature and liquid analysis. When assessing a listing, check the complete order code, serial number and product description together. The manufacturer's broad portfolio does not imply that every instrument type is available in this section.
Your contact for each product is the store identified on its product page. Use that store's contact details to confirm availability, pricing, test scope, delivery and sale terms. A sold unit may still appear in stock temporarily, so confirm the available quantity before ordering. A used model that sells out may not become available again.
Choosing the right instrument: configuration and process connection
Measurement type and range: For a pressure sensor, check both the measurement range and whether it measures gauge, absolute or differential pressure. Suitability for water pressure, compressor pressure, steam and hot oil or vacuum measurement must be established from the instrument's own technical data.
Parts in contact with the process: Compare the thread or flange size, sensor material, seal type and permitted process temperature and pressure. Instruments with the same measuring range may have different chemical resistance or mounting requirements. For level instruments, the measuring principle and probe length matter; for flow instruments, consider pipe diameter and the measured fluid. A connection that physically fits does not establish process suitability.
Electrical compatibility: Check the supply voltage, wiring and output type. 4–20 mA and 0–10 V signals are not directly interchangeable. If HART or another communication option is required, confirm it against the complete order code and documentation. Assess compatibility with the connected analog signal controller and pressure indicator.
Temperature measurement: If an instrument will be used with an existing temperature sensor, check sensor type, wiring arrangement and measuring range. A Pt100 input differs from a thermocouple input. The receiving temperature controller must also accept the relevant sensor or transmitter output.
Test information is not a calibration certificate
Review the photographs, nameplate details and test descriptions together. Powering up, displaying a reading or producing an output signal does not establish verified measurement accuracy. If a calibration certificate is available, check its serial number, date, test points and results. Do not assume that a feature has been tested unless the documentation confirms it.
Check the listing for any missing probe, electronics module, display or connection component. Equipment identified as faulty may also be sold for repair or spare parts. Units listed as faulty should not be treated as working instruments. We do not provide a commercial warranty for equipment in this used category; an unused or boxed condition does not change its sales classification.
Offer your equipment to us
If you have Endress+Hauser equipment or automation products from other brands to sell, email the complete model and order codes, serial numbers, quantities, operating condition, photographs and your asking price to otomasyonavm@gmail.com. Include clear photographs of the labels, process connections and any damage. We do not purchase equipment without an invoice. Include invoice information with your offer.
The owner sets the asking price; we do not price your equipment for you. Offers are reviewed for possible purchase; submitting an email does not constitute a purchase commitment. Visitors cannot list and sell their own equipment directly in this section. This email address is for offering equipment to us; enquiries about existing listings should go to the relevant store.
Find used equipment by category
The used models main page organizes equipment by category rather than by brand. Browse used sensors, level sensors and analog output sensors from different manufacturers. For browsing by brand, visit the used automation equipment home page.
Consider new equipment alternatives too
Used equipment is not always the more economical option. If an exact older model is not essential, compare our new industrial sensors, pressure measurement products, temperature sensors and analog signal control products. These are product groups to assess against your application; they should not be assumed to be direct replacements for a particular Endress+Hauser instrument. Check each new product's warranty and support terms with its listing and selling store.
Endress Hauser FLT33-1380/0
Endress Hauser FLT33-1380/0 is a level detection/control device. It is used in the level-monitoring ..
322.00USD Ex Tax: 322.00USD
Endress Hauser FTL20-0020
Endress Hauser FTL20-0020 is a level detection/control device. It is used in the level-monitoring an..
323.00USD Ex Tax: 323.00USD
Endress Hauser FTL31-11V0/0
Endress Hauser FTL31-11V0/0 is a level detection/control device. It is used in the level-monitoring ..
326.00USD Ex Tax: 326.00USD
Endress Hauser FTL320-F1A1
Endress Hauser FTL320-F1A1 is a level detection/control device. It is used in the level-monitoring a..
183.00USD Ex Tax: 183.00USD
Endress Hauser FTL325N-F1A1
Endress Hauser FTL325N-F1A1 is a level detection/control device. It is used in the level-monitoring ..
165.00USD Ex Tax: 165.00USD
Endress Hauser FTL325P-F1A1
Endress Hauser FTL325P-F1A1 is a level detection/control device. It is used in the level-monitoring ..
164.00USD Ex Tax: 164.00USD
Endress Hauser FTL33 1380/0
Endress Hauser FTL33 1380/0 is a level detection/control device. It is used in the level-monitoring ..
100.00USD Ex Tax: 100.00USD
ENDRESS HAUSER liquiphant ftl31
ENDRESS HAUSER liquiphant ftl31 is a level detection/control device. It is used in the level-monitor..
100.00USD Ex Tax: 100.00USD
Endress Hauser LİQUIPHANT T FTL20-0020
Endress Hauser LİQUIPHANT T FTL20-0020 is a level detection/control device. It is used in the level-..
176.00USD Ex Tax: 176.00USD
ENDRESS HAUSER PMC131-A11F1A1Q
ENDRESS HAUSER PMC131-A11F1A1Q is a pressure sensor/switch. It brings pressure information into the ..
100.00USD Ex Tax: 100.00USD
Endress Hauser PMC131-A11F1A3K
Endress Hauser PMC131-A11F1A3K is a pressure sensor/switch. It brings pressure information into the ..
325.00USD Ex Tax: 325.00USD
Endress Hauser PMC131-A11F1AAR
Endress Hauser PMC131-A11F1AAR is a pressure sensor/switch. It brings pressure information into the ..
324.00USD Ex Tax: 324.00USD














