Eliwell

Used Eliwell Temperature and Refrigeration Controllers
Browse our second-hand Eliwell devices in this section. Eliwell is known for control solutions for commercial and industrial refrigeration, temperature control and air conditioning. The manufacturer's wider product range does not mean that every device listed here provides all these functions. For the unit you intend to purchase, refer to its individual product page and the documentation for its exact model code.
If you need to replace an older controller or find a spare for existing equipment, check more than the brand and series printed on the front. The complete model code, supply voltage, sensor input and output configuration must be considered together. Depending on your application, you can also compare temperature controllers with refrigeration and defrost controllers.
What should you check before buying?
Model and electrical compatibility: Check the model suffixes, supply rating, wiring diagram and panel mounting dimensions shown in the relevant documentation. Two controllers with the same appearance may have different hardware. An identical front panel does not establish that one unit can directly replace another.
Probe compatibility: Your existing temperature sensor must match the controller's supported input type and sensor characteristics. An NTC sensor and a PTC sensor should not be treated as interchangeable. If you need a new probe, browse our NTC sensor models and PTC sensor models; matching the sensor name alone is insufficient.
Outputs and application: Check whether the specific model provides compressor, fan, defrost and alarm outputs. Assess relay contact ratings against the actual load type; do not assume the controller can switch the load directly. Depending on the circuit design, contactors, interface relays and sockets and fuses may also be required. This is general information, not a wiring or product selection recommendation for your equipment.
Who should you contact about a product?
Your contact for each product is the store identified on its product page. Contact that store to confirm availability, physical condition, included accessories, test coverage and sales terms. This brand page provides general information and navigation; it does not establish that a particular item is available or suitable for your application.
Technical support and consultancy: We do not provide installation, parameter configuration, programming, commissioning or application consultancy for the second-hand Eliwell products in this section. Product sales information and assistance with adapting a controller to your machine are different services. Have your own qualified technical personnel assess suitability using the product documentation.
Test information, condition and warranty
Read the product description and any available test information carefully. A statement that a device has been tested does not establish that every input, output and operating scenario has been checked. Refer to the stated test scope and assess missing accessories, visible damage and disclosed faults before purchasing. Do not assume that the existing parameter settings are suitable for your application.
This section may occasionally include faulty, incomplete or parts-only devices, with their condition disclosed. Assess these separately from working units. We do not offer a commercial warranty for products in this second-hand section; unused or boxed condition does not mean that an item is sold with a new-product warranty. Obtain the applicable sales terms from the store responsible for the product.
Stock information: There may be a delay between a sale and the stock record being updated. Confirm the available quantity and supply status with the product's store before ordering. An out-of-stock second-hand model is not guaranteed to become available again.
Browse by product category as well as by brand
If you cannot find the item here, visit our second-hand models main page. That page groups used products by category and function rather than by brand. You can compare devices from different manufacturers in the used temperature controllers and used refrigeration controllers categories. Being listed in the same category does not make two products direct replacements.
When should you consider a new alternative?
Second-hand does not always mean lower cost. Limited availability can make an older model more expensive than a new alternative. If an exact replacement is not essential, compare our new control devices, particularly the temperature and refrigeration categories. If your application also requires humidity monitoring or control, explore our humidity and temperature controllers. Check warranty, documentation and support terms on each new product's page and with its selling store; similar functions alone do not establish compatibility.
Do you have Eliwell products to sell?
If you own Eliwell or other industrial automation equipment that you wish to sell, email otomasyonavm@gmail.com. Include the brand and complete model code, quantity, known condition, clear photographs of the label and equipment, any available test information and your asking price. We do not purchase products without an invoice. Please state whether you can issue an invoice for the sale. Sending an enquiry does not constitute a commitment by us to purchase the equipment.
ELIWELL mod.EWTR 180
ELIWELL mod.EWTR 180 is a refrigeration/defrost controller. It is used for temperature control and s..
210.00USD Ex Tax: 210.00USD
Eliwell PA-21SC/80402.11
Eliwell PA-21SC/80402.11 is a pressure sensor/switch. It brings pressure information into the measur..
1.00USD Ex Tax: 1.00USD
Eliwell PAA-21SC/80402.1/-8
Eliwell PAA-21SC/80402.1/-8 is a pressure sensor/switch. It brings pressure information into the mea..
1.00USD Ex Tax: 1.00USD


