The Derell DLC-K Smart Relay features the following specifications:

Programming: It can be programmed using a free Ladder Logic Editor software called "Derell C Editor" that runs on PC. Programming, simulation, and download operations are available for free on the website www.otomasyonavm.com.

Screen: The device has a backlit 2x16 character LCD screen or LED indicators.

Discrete Inputs: OFF: 0-2VDC; ON: 10-32VDC, maximum 32VDC, common (-) negative connection (PNP/Totem Pole), isolated (opto-coupler) (maximum isolation voltage 40VAC).

Discrete Input Filter Time: minimum 8ms (ON->OFF, OFF->ON).

Fast Input ON Time: minimum 1.25ms.

Fast Input OFF Time: minimum 1.25ms.

Fast Input Frequency: maximum 400Hz, 50% duty cycle.

Analog Input: 0-10VDC, maximum 16VDC, separate analog ground is optional.

A/D Resolution: 10 bit.

Analog Input Sampling Time: 100ms.

PTC Input: 2 wire PTC (-50..150oC), problematic for sensors.

Discrete Outputs (Relay): 10xRelay, maximum 250VAC, 2A, resistive load.

Discrete Outputs (Transistor): 10xPNP Transistor, maximum 32VDC, 0.3A (optional).

SW Download Interface: RS-232.

Network Interface: RS-485.

RS-485 Cable: Shielded stranded cable; 24 AWG. Connection; A<->A, B<->B.

RS-485 Termination: Termination of the line may be required. See the relevant application note.

Timer Resolution: minimum 0.01 seconds.

Timer Accuracy: Preset value is ± 0.1% of %1 or 1 digit (whichever is greater).

Ladder Scan Time: less than 10ms.

Torque for Screwing: maximum 0.5 N.m.

Power Supply Voltage: 18-32VDC (isolated; maximum isolation voltage 40VAC) or 100-240VAC, 50-60Hz (optional).

Auxiliary Power Output: (for Discrete Inputs) 18Vdc, maximum 50mA (maximum isolation voltage; 40VAC).

Power Consumption: less than 6W.

Operating Temperature: between 0°C and 50°C.

Storage Temperature: between -10°C and 60°C.

Humidity: 80%, smoothly decreasing to 50% at 50°C (non-condensing).

Operating Altitude: less than 2000m.

Protection Class: IP20 according to EN 60529.

EMC: TS EN 61000-6-2:2019, IEC 61000-6-2:2016 RLV, TS EN 61000-6-4:2020, IEC 61000-6-4:2018 RLV.

Safety: TS EN 61010-1:2012 + A1:2019 + A1/AC:2019.