Gemo AR2-A-24VDC-14D-RTC – Expandable Smart Relay / PLC with 14 Digital Inputs, Relay Outputs and RTC

Gemo AR2-A-24VDC-14D-RTC is a compact, expandable smart relay / PLC for machine control, panel automation and general-purpose sequencing applications. It operates from a 24 VDC supply and combines 14 digital inputs, 10 relay outputs, a dedicated PTC temperature input and a battery-backed real-time clock in a DIN-rail mounted controller.

Gemo AR2 controllers have been available through our website since 2011.

Inputs, outputs and power supply

Power supply: Nominal 24 VDC, with an operating range of approximately 18–32 VDC. Maximum power consumption is 6 W.

Digital inputs: 14 inputs for 24 VDC control signals. The standard digital input filter time is at least 8 ms for both ON-to-OFF and OFF-to-ON transitions.

Relay outputs: 10 digital relay outputs, rated up to 250 VAC / 2 A for resistive loads. The relay-output version is well suited to conventional control circuits where direct switching of contactors, signal devices or other compatible loads is required.

Analog input: This particular model has no general-purpose 0–10 V analog input.

Analog output: Not available.

PTC temperature input: One dedicated input is provided for a 2-wire PTC temperature sensor, with a measurement range of approximately -50 to +150 °C. This is a dedicated temperature-sensor input and should not be treated as a standard analog voltage input.

Battery-backed real-time clock

The RTC version includes a battery-backed real-time clock, allowing control sequences to be triggered according to actual date and time. Weekly and annual schedules can be created for applications such as lighting, pumps, ventilation systems, heating equipment and other machinery that must operate at predetermined times.

For installations where calendar-based control is not required, see the Gemo AR2-A-24VDC-14D version without RTC.

Ladder programming and internal functions

The AR2 series is programmed with GEMO Ladder Editor. The programming area supports 256 ladder lines, 5 contact columns and 1 output column, with rising-edge and falling-edge functions available for contacts.

Programs are downloaded to the controller through its RS-232 programming interface.

Available logic resources include 32 timers, 32 16-bit up/down counters and 32 offset counter comparators. These built-in functions make the AR2 suitable for compact sequencing, timing and counting applications without requiring a larger PLC platform.

Ladder scan time: Up to 10 ms.

Timer resolution: Minimum timing resolution is approximately 10 ms. Timer accuracy is specified as ±0.1% or 1 digit, whichever is greater.

High-speed counter inputs: Minimum ON and OFF times are approximately 1.25 ms. These inputs are intended for pulse counting and should not be confused with high-speed positioning outputs.

Servo and step motor applications

The AR2-A-24VDC-14D-RTC does not provide a dedicated high-speed pulse / direction output for positioning servo or step motor systems. Applications requiring high-speed motion control should use a PLC or motion controller designed specifically for pulse-train positioning.

PID control

A built-in PID control algorithm is not provided. Closed-loop temperature, pressure, flow or process-control applications requiring PID regulation should therefore use a suitable PID controller or a PLC with integrated PID functions.

Display and operator interface

The controller features a 2 × 16 character backlit LCD display, three programmable front-panel function keys and a three-level password-protected menu system. User screens can be configured to display operating values, machine status and operator messages directly on the controller.

Can an external HMI be connected? Yes. A compatible Gemo PLC operator panel / HMI can be integrated using the appropriate communication hardware.

For Modbus RTU communication, the appropriate AR2-S-24VDC-MB1 communication gateway and compatible controller software are required. The RS-485 expansion connection should not be assumed to function as a standard direct Modbus HMI port.

Expansion capability

Compatible I/O expansion modules can be connected through the controller's RS-485 expansion interface. Depending on the expansion module used, the complete system can be extended to approximately 28 digital inputs and 20 digital outputs.

RS-485 cabling: Use a twisted, shielded, 2-core 24 AWG communication cable. Wiring polarity, shielding and line termination should follow the manufacturer's installation instructions.

Operating environment and installation

Operating temperature: 0 to 50 °C.

Protection rating: IP20 according to EN 60529.

Relative humidity: Up to 80% at 30 °C, decreasing linearly to approximately 50% at 50 °C, non-condensing.

Terminal tightening torque: Maximum 0.5 N·m.

EMC: EN 61000-6-1 and EN 61000-6-3 requirements should be taken into account during panel design. When the controller shares an enclosure with AC motor drives, frequency inverters, contactors or other sources of electrical noise, proper grounding, shielding and physical separation of control and power wiring should be applied.

Gemo AR2 software and documentation

Download GEMO Ladder Editor V2.4 programming software for AR2 PLC programming and configuration.

For detailed programming instructions, timer and counter functions, RTC configuration and controller settings, refer to the Gemo AR2 PLC English user manual.

For additional models and pricing, visit the Gemo price list, Gemo Electronic main page or our PLC product group.

For product selection or technical information, use our Gemo contact page or contact us at gemo@otomasyonavm.com.

Installation notice: Installation, wiring and commissioning of the Gemo AR2 should be carried out only by qualified technical personnel. Disconnect all power sources before working on the control panel. Wiring, grounding and protection measures must comply with the manufacturer's instructions and the electrical and machinery-safety requirements applicable at the installation site.

Write a review

Note: HTML is not translated!
Bad Good

Gemo AR2-A-24VDC-14D-RTC

  • 110.00USD

  • Ex Tax: 110.00USD

Related Products

DLC-R1410-R-A

DLC-R1410-R-A

DERELL DLC-R1410-R-A is a programmable logic relay. It is used in smaller automation applications re..

100.00USD Ex Tax: 100.00USD

DLC-R1410-R-B

DLC-R1410-R-B

DERELL DLC-R1410-R-B is a programmable logic relay. It is used in smaller automation applications re..

100.00USD Ex Tax: 100.00USD

DLC-R1410-GR-B

DLC-R1410-GR-B

DERELL DLC-R1410-GR-B is a programmable logic relay. It is used in smaller automation applications r..

100.00USD Ex Tax: 100.00USD

DLC-R1410-GR-A

DLC-R1410-GR-A

DERELL DLC-R1410-GR-A is a programmable logic relay. It is used in smaller automation applications r..

100.00USD Ex Tax: 100.00USD