Gemo AR2-A-24VDC-14D – Expandable Smart Relay / PLC with 14 Digital Inputs and 10 Relay Outputs
Gemo AR2-A-24VDC-14D is a compact, expandable smart relay / PLC designed for machine automation, control panels, sequencing, timing and counting applications. It operates from a 24 VDC supply and provides 14 digital inputs, 10 relay outputs and a dedicated PTC temperature-sensor input.
Gemo AR2 controllers have been available through our website since 2011.
Power supply and I/O
Power supply: Nominal 24 VDC, with an operating range of approximately 18–32 VDC. Maximum power consumption is 6 W.
Digital inputs: 14 inputs for 24 VDC control signals. Standard input filtering is at least 8 ms for both ON-to-OFF and OFF-to-ON transitions.
Relay outputs: 10 digital relay outputs, rated up to 250 VAC / 2 A for resistive loads. These outputs can be used for switching suitable contactors, signalling devices and other control loads within the specified contact ratings.
Analog input: This model has no general-purpose 0–10 V analog input.
Analog output: Not available.
PTC temperature input: One dedicated input is provided for a 2-wire PTC temperature sensor, with a measurement range of approximately -50 to +150 °C. The PTC channel is a dedicated temperature input and is not a standard analog voltage input.
Real-time clock: This version does not include an RTC. Applications requiring weekly, annual or calendar-based control should use the Gemo AR2-A-24VDC-14D-RTC version.
Ladder programming and internal functions
The AR2 series is programmed with GEMO Ladder Editor. The ladder workspace supports 256 program lines, 5 contact columns and 1 output column. Rising-edge and falling-edge functions can be assigned to contacts where required.
Programs are transferred through the controller's RS-232 programming interface.
Available logic resources include 32 timers, 32 16-bit up/down counters and 32 offset counter comparators. These functions allow many compact machine-control applications to be implemented without separate external timers or counters.
Ladder scan time: Up to 10 ms.
Timer resolution: Minimum timing resolution is approximately 10 ms. Timer accuracy is specified as ±0.1% or 1 digit, whichever is greater.
High-speed counter inputs: Minimum ON and OFF times are approximately 1.25 ms. These inputs are intended for faster pulse counting and should not be confused with high-speed motion-control outputs.
Servo and step motor control
The AR2-A-24VDC-14D does not provide a high-speed pulse / direction output for positioning servo or step motor systems. Applications requiring pulse-train positioning should use a PLC or motion controller specifically designed for high-speed motion control.
PID control
A built-in PID algorithm is not provided. Closed-loop temperature, pressure, flow or similar process-control applications should use a suitable controller or a PLC with integrated PID functionality.
Display and operator functions
The controller features a 2 × 16 character backlit LCD display, three programmable front-panel function keys and a three-level password-protected menu system. Operator screens can be configured to show process values, machine status and application messages.
Can an external HMI be connected? Yes. A compatible operator panel / HMI can be integrated using the appropriate communication hardware.
For Modbus RTU communication, the appropriate AR2-S-24VDC-MB1 communication gateway and compatible controller software are required. The RS-485 expansion interface should not automatically be treated as a standard direct Modbus HMI port.
I/O expansion
Compatible expansion modules can be connected through the controller's RS-485 expansion interface. Depending on the installed expansion module, the complete system can be extended to approximately 28 digital inputs and 20 digital outputs.
RS-485 cabling: Use twisted, shielded, 2-core 24 AWG communication cable. Polarity, shielding and line termination should follow the manufacturer's installation instructions.
Operating environment
Operating temperature: 0 to 50 °C.
Protection rating: IP20 according to EN 60529.
Relative humidity: Up to 80% at 30 °C, decreasing linearly to approximately 50% at 50 °C, non-condensing.
Terminal tightening torque: Maximum 0.5 N·m.
EMC: EN 61000-6-1 and EN 61000-6-3 requirements should be considered during panel design. When the controller is installed alongside AC motor drives, frequency inverters, contactors or other sources of electrical noise, proper grounding, shielding and separation of control and power wiring should be applied.
Gemo AR2 programming software and documentation
Download GEMO Ladder Editor V2.4 programming software for AR2 programming and configuration.
For programming instructions, timer and counter functions and controller configuration, refer to the Gemo AR2 PLC English user manual.
For other Gemo models and pricing, visit the Gemo price list, Gemo Electronic main page or our PLC product group.
For technical information and product selection, use our Gemo contact page or contact us at gemo@otomasyonavm.com.
Installation notice: Installation, wiring and commissioning of the Gemo AR2 should be carried out only by qualified technical personnel. Disconnect all power sources before working on the control panel. Wiring, grounding and protection measures must comply with the manufacturer's instructions and the applicable electrical and machinery-safety requirements at the installation site.
Gemo AR2-A-24VDC-14D
- Mağaza: Efes Otomasyon
- Store: Efes Automation
- Brands GEMO
- Product Code: Gemo AR2-A-24VDC-14D
- Availability: 12
-
110.00USD
- Ex Tax: 110.00USD
Related Products
DLC-R1410-R-A
DERELL DLC-R1410-R-A is a programmable logic relay. It is used in smaller automation applications re..
100.00USD Ex Tax: 100.00USD
DLC-R1410-R-B
DERELL DLC-R1410-R-B is a programmable logic relay. It is used in smaller automation applications re..
100.00USD Ex Tax: 100.00USD
DLC-R1410-GR-B
DERELL DLC-R1410-GR-B is a programmable logic relay. It is used in smaller automation applications r..
100.00USD Ex Tax: 100.00USD
DLC-R1410-GR-A
DERELL DLC-R1410-GR-A is a programmable logic relay. It is used in smaller automation applications r..
100.00USD Ex Tax: 100.00USD



