Gemo AR2-P-230VAC-10D2A PLC / Smart Relay is a compact and expandable controller designed for industrial automation applications. The standard unit operates from a 220 VAC supply and provides 10 digital inputs, 2 analog inputs and 7 relay outputs.
Gemo AR2-P series controllers have been available through our website since 2011.
Gemo AR2-P-230VAC-10D2A – standard I/O configuration
• Supply voltage: 220 VAC
• Digital inputs: 10 inputs, 24 VDC
• Analog inputs: 2 × 0-10 V analog inputs. These inputs can also be used with 4-20 mA signals.
• Analog output: Not available.
• Relay outputs: 7 outputs, maximum 2 A per relay for resistive loads.
• Real-time clock: Not included as standard. Real-time clock functionality is available as an option.
• Temperature sensor input: 1 input for a PTC sensor.
• EMC and panel installation: The internal isolation allows the controller to operate in automation panels containing equipment such as AC motor speed controllers / VFDs and frequency inverters, which may otherwise be sources of electrical interference.
• PID control: The AR2-P does not include a built-in PID algorithm. Applications requiring PID control should use an appropriate PLC or controller.
• Pulse output: There is no dedicated pulse output for positioning or direct servo and stepper system control. A stable 1 ms output is available for timer functions.
• Can an operator display be connected? Yes. Compatible display and operator panel models can be connected to the AR2-P. See HMI options for Gemo PLC controllers.
Main features of the Gemo AR2-P PLC / Smart Relay
• Digital input filter time: Minimum 8 ms for ON → OFF and OFF → ON transitions
• Programming language: Ladder logic with 256 lines, 5 contact columns and 1 output column
• Edge detection: Rising-edge and falling-edge functions are available for contacts.
• Programming interface: Program transfer through RS-232 cable
• Power consumption: Maximum 6 W
• Digital relay outputs: Maximum 250 VAC / 2 A with resistive load
• Analog input capacity: Expandable to 4 × 0-10 V analog inputs
• Counter comparators: 32 counter comparator functions with offset capability
• Menu protection: Three-level password-protected menu system
• Operating temperature: 0°C to 50°C
• Expansion modules: Expansion module communication through RS-485
• Terminal tightening torque: Maximum 0.5 N·m
• Digital input capacity: Expandable to 28 digital inputs with input filtering functions
• Weekly / annual alarms: Available when the optional real-time clock is installed.
• EMC: EN 61000-6-1 and EN 61000-6-3, intended for light industrial environments.
• Digital output capacity: Expandable to 20 digital outputs
• Display functions: Up to 32 display pages, each supporting four sub-screens
• Timer functions: 32 timers with 11 operating modes and 9 time-range selections
• Real-time clock: Optional
Electrical and technical specifications
• Protection class: IP20 according to EN 60529
• Relative humidity: Up to 80% at 30°C, decreasing linearly to 50% at 50°C. Non-condensing environment required.
• A/D resolution: 10 bit
• Fast counter input OFF time: Minimum 1.25 ms
• RS-485 cable: Twisted and shielded 2-core, 24 AWG cable. Connections are made A ↔ A and B ↔ B.
• Analog inputs: 0-10 VDC, maximum 16 VDC, with a separate analog ground.
• Timer accuracy: ±0.1% of preset value or 1 digit, whichever is greater.
• PTC input: 2-wire PTC sensor input for approximately -50°C to +150°C measurement range.
• Fast counter input ON time: Minimum 1.25 ms
• Front panel: 3 programmable F keys with filtering functions
• Startup display: Four sub-screen startup display suitable for logo presentation
• Ladder scan time: Maximum 10 ms
• Analog comparators: 16 hysteresis-enabled analog comparator functions
• Counters: 32 counters, 16-bit, selectable up/down counting
Gemo AR2-P software, manuals and related information
• Gemo AR2 PLC User Manual – English PDF manual
• Gemo Ladder Editor programming software – Version 2.4 ZIP package
Important safety notice
Installation, wiring and commissioning of the Gemo AR2-P PLC / Smart Relay must be carried out only by qualified technical personnel. Installation must comply with applicable electrical and machinery safety requirements, including 2006/42/EC where applicable, as well as relevant local regulations.
Otomasyon AVM cannot accept responsibility for installations that do not comply with applicable local laws or other regulations governing the installation location. Failure to follow the installation and operating instructions supplied by GEMO may result in equipment damage or conditions that are not covered by the product warranty.
Detailed installation, wiring and operating information is provided in the product manual. For further technical information, contact us at gemo@otomasyonavm.com or visit the Gemo contact page.
Gemo AR2-P-230VAC-10D2A
- Mağaza: Efes Otomasyon
- Store: Efes Automation
- Brands GEMO
- Product Code: Gemo AR2-P-230VAC-10D2A
- Availability: 12
-
110.00USD
- Ex Tax: 110.00USD
Related Products
DLC-R1410-R-A
DERELL DLC-R1410-R-A is a programmable logic relay. It is used in smaller automation applications re..
100.00USD Ex Tax: 100.00USD
DLC-R1410-R-B
DERELL DLC-R1410-R-B is a programmable logic relay. It is used in smaller automation applications re..
100.00USD Ex Tax: 100.00USD
DLC-R1410-GR-B
DERELL DLC-R1410-GR-B is a programmable logic relay. It is used in smaller automation applications r..
100.00USD Ex Tax: 100.00USD
DLC-R1410-GR-A
DERELL DLC-R1410-GR-A is a programmable logic relay. It is used in smaller automation applications r..
100.00USD Ex Tax: 100.00USD




