Delta DVPACAB4A07

Delta DVPACAB4A07

Delta DVPACAB4A07 is a 0.7-metre (70 cm / 700 mm) extension cable between a DVP-EH series PLC and an extension module. The manufacturer lists it among peripheral accessories in the DVP/TP catalogue. Verify the complete CPU code, extension module and connection port together.

Function within an EH system

DVPACAB4A07 extends the physical PLC-to-extension connection in a suitable EH system. It does not add input/output channels by itself and should not be treated as a computer programming cable or external field-terminal cable. Review Delta DVP-EH alongside Delta DVP EH modules.

The EH, EH2 and EH3 names do not establish automatic cable compatibility. For a machine using Delta DVP-EH2 or Delta DVP-EH3, check the CPU and module hardware documentation separately. A general EH catalogue description does not verify pin assignments and connection support for every individual model.

Layout, module order and power

When selecting the 0.7-metre cable, allow for connector positions, cable turns and maintenance access. Avoid a tight installation that strains the connection port. Splicing the cable or joining cables in series must not be assumed to form a manufacturer-approved extension arrangement.

Supported module count, module order, power requirements and I/O addressing depend on the CPU and extension hardware. Evaluate Delta DVP expansion modules and Delta DVP power supplies as parts of the complete system. Replacing the cable does not itself create new I/O addresses or increase expansion capacity.

Differences from DVPACAB403 and terminal cables

The same manufacturer accessory table separately lists Delta DVPACAB403 as a 0.3-metre I/O extension cable for DVP-ES/EX. This description for Delta DVP-ES and Delta DVP-EX must not be merged with DVPACAB4A07's EH / 0.7-metre description. Similar ordering codes do not establish interchangeability.

Delta DVP / AH I/O cables and Delta external terminals include different products for taking module signals to field connection points. When selecting DVPACAB4A07, distinguish the PLC-to-extension-module connection from the module-to-external-terminal connection.

Software and document selection

The cable has no driver, firmware or programming tool of its own. Check Delta WPLSoft or Delta ISPSoft support for the PLC project and module configuration through Delta PLC software, according to CPU generation. Identify the main family under Delta DVP PLC series.

Start document selection at Delta PLC accessories files. The Peripheral Accessory table on printed page 49 of the 2023-01-03 DVP/TP catalogue lists DVPACAB4A07 together with its EH / 0.7-metre description. Use the actual CPU and module hardware manuals for installation and system limits.

Editor's Note

Photograph the connection before removing the old cable. Keep the CPU code, module order, both ends and cable label in the same record. Do not rely on cable colour alone to reconstruct the connection later.

Disconnect system power before removing or fitting the cable. Identify any separate field-side module supplies as well. Inspect the connection and any locking mechanism instead of pulling on the cable jacket.

If a group of modules disappears, inspect the shared connection path first. Check the CPU expansion connection, cable ends and module supplies together. Compare with a suitable known-good cable before condemning several modules.

Check continuity with both ends disconnected. Follow pin assignments from a verified drawing and watch for readings that change when the cable is gently moved near a connector. An intact outer jacket does not establish conductor integrity.

Evaluate the complete code and physical condition when buying used. Look for bent contacts, cracked housings, loose retainers and crushed cable. Reduce bending and tension during installation and route it separately from motor and drive power cables.

Related topics

Review supporting products under Delta DVP other accessories and Delta PLC accessories, and device documentation under Delta PLC and HMI manuals.

External reference: Delta DVP/TP manufacturer catalogue — 2023-01-03, English.