Delta DVP28SV11R
Delta DVP28SV11R PLC with 16 Inputs and 12 Relay Outputs
The Delta DVP28SV11R is a compact 24 V DC PLC from the original DVP-SV series. It has 16 digital inputs, 12 relay outputs and 16K steps of program memory. It can read sensors and sequence contactors, valves and indicators on packaging, conveyor and filling machines.
On a conveyor, a photoelectric sensor can detect a passing product, while an inductive sensor can detect the position of a metal part. The PLC can then command the contactor that starts the motor. When tracing the circuit, follow the relay contact and the load supply separately. The output LED shows the PLC command, and the load receives power through its common terminal.
Technical specifications and terminals
CPU supply • Nominal 24 V DC, operating range 20.4–28.8 V DC, CPU power consumption 6 W. Size the 24 V DC power supply for the CPU, expansion modules and field devices that share the supply.
Digital inputs • Sixteen 24 V DC inputs at X0–X7 and X10–X17. Connect the S/S common to 0 V for PNP sensors and to +24 V for NPN sensors. Verify the sensor type from its label and wiring diagram.
Relay outputs • Twelve outputs at Y0–Y7 and Y10–Y13, arranged in C0–C3 common groups. Delta’s instruction sheet specifies resistive load limits of 1.5 A per output and 5 A per common group. The specified working voltage is 250 V AC or below 30 V DC. Choose suppression and interposing relays for contactor and valve coils according to the inductive load characteristics.
High-speed counting and expansion • The designated X inputs can count encoder pulses. Select the input according to the CPU hardware revision. This model uses mechanical relays for its Y outputs. For high-speed pulse commands to a servo or stepper drive, check the transistor outputs of the DVP28SV11T. For additional I/O or analog measurements, check compatible DVP expansion modules and Slim analog modules.
Programming software and cable
Use WPLSoft to write ladder logic, transfer programs and monitor I/O online. ISPSoft also supports DVP-SV. Select a serial communication channel in COMMGR. Confirm the SV CPU family in the project and keep the original copy of any WPLSoft project before converting it.
The COM1 RS-232 programming port uses an 8-pin mini-DIN connector at the CPU. The Delta DVPACAB2A30 cable connects a PC’s DB9 RS-232 port to PLC COM1. A USB-only PC needs a suitable USB-to-RS-232 adapter and its driver. Select the COM number assigned by Windows. See Delta PLC cables for other options. COM2 RS-485 can connect to an HMI, drive or instrument using Modbus. Check the station address, baud rate, parity and communication mode at both ends.
Editor’s Note
When buying a used unit, ask for photos showing the full DVP28SV11R label, DC power plug and terminals. The R and R2 look similar, so check project and expansion compatibility against the exact model.
Before removing the CPU, back up the program if you have access. Record the RUN/STOP switch position, expansion module order and serial settings.
If the sensor detects a target and the X LED stays off, check the S/S common and the sensor’s PNP or NPN type. Compare the input state with the PLC’s online monitor.
If the Y LED is on and the load stays off, check the field supply at the relevant C terminal and the load fuse. With power disconnected, check contact continuity using a multimeter. A contact that stays closed when it should open may have welded.
If a fault appears only when the machine runs, check for supply voltage drop under load, panel grounding and sources of electrical interference. A loose supply terminal can cause intermittent faults on a PLC that works on the bench.
Related PLC models
DVP28SV11T • Original SV with NPN transistor outputs. DVP28SV11R2 • SV2 with relay outputs and 30K steps of memory. DVP28SV11T2 • SV2 with NPN transistor outputs. DVP28SV11S2 • SV2 with PNP transistor outputs. For a new control panel, you can also review Derell B Series PLCs against your I/O and communication requirements.
Related topics and Delta files
Delta DVP PLC PDF files · Delta DVP PLC series · Used Delta PLC models · Used PLCs and CPUs · Delta main page