Delta DOP-W

Delta DOP-W is a large-format touchscreen HMI family comprising DOP-W105B, DOP-W127B and DOP-W157B. All three have a 4:3 aspect ratio: their 800 × 600 or 1024 × 768 resolution does not describe a 16:9 widescreen panel. Compare the cutout, serial ports, Ethernet and existing DOPSoft project as well as the display.

The family provides two Ethernet connections, two serial channels, SDHC and model-dependent USB Host hardware. The operator interface displays and manages data from PLCs and other devices. Similar screen size does not transfer the PLC/motion-control role of HMC07 or HMC08 to a DOP-W panel.

DOP-W105B, W127B and W157B differences

DOP-W105B: 10.4-inch TFT, 800 × 600 pixels, with a 285.2 × 210.2 mm panel cutout. Typical brightness is 300 cd/m². It has one USB Host and a stereo headphone output. The document specifies 13.5 W panel consumption.

DOP-W127B: 12.1-inch TFT, 1024 × 768 pixels, with a 302.7 × 228.7 mm panel cutout. Typical brightness is 500 cd/m². It has three USB Hosts, stereo output and a built-in 1.5 W speaker. Specified panel consumption is 18.5 W.

DOP-W157B: 15-inch TFT, 1024 × 768 pixels, with a 372.4 × 283.7 mm panel cutout. Typical brightness is 450 cd/m². It has three USB Hosts, stereo output and a built-in 1.5 W speaker. Specified panel consumption is 21.6 W. Although its resolution matches W127B, the display and mechanical dimensions differ.

The drawings show +1/0 mm cutout tolerance and 1.6–6 mm panel thickness. These are not the external bezel dimensions. When checking mounting and power connections, verify the drawing for the actual revision together with the gasket, fasteners and rear cable clearance. Reference: WB05 instruction PDF p.2 and combined catalogue PDF p.21.

Ethernet, COM2/COM3 and USB Host

All three models provide two Ethernet ports and the serial ports COM2 and COM3; COM1 is not provided. Match the RS-232/RS-422/RS-485 mode and pinout to the selected connection. Check the project’s PLC driver, address, baud rate, parity and network settings. Do not select programming and communication cables or communication peripheral units by connector shape alone.

W105B has one USB Host; W127B and W157B have three. SDHC support is also available. A Host socket must not be treated as a USB Client programming connection to a PC. Use a project-transfer method supported by the DOP-W model. Review Ethernet expansion modules and HMI accessories against the existing interfaces and documented device generation.

RTC backup: a supercapacitor

DOP-W documents specify a gold-cap/supercapacitor for RTC backup. Under the specified conditions, Delta describes retention of at least seven days. Do not turn this into routine CR2032 battery-replacement advice. Clock backup, the source project and alarm/history data backups are separate matters.

If the clock resets after power removal, record the time setting, preceding operating/charging conditions and outage duration. Ageing units may require inspection of the supercapacitor and associated circuit. Adding a battery or replacing an unidentified component before preserving data is not a suitable maintenance procedure.

Power supply and the DOPSoft project

Nominal supply is 24 V DC, with a specified −10% / +15% range: 21.6–27.6 V DC. Delta requires an isolated supply. Add USB peripherals and other loads to the panel demand. Check current capacity, cable voltage drop and cabinet temperature when selecting shared HMI power supplies.

Record a DOPSoft release that supports DOP-W and the panel’s existing OS/firmware versions. Back up screens, PLC connections, macros, fonts, recipes and alarm records before conversion. Migration to DOP-100 requires conversion and functional checks on a copy of the project, with the working original preserved.

For legacy installers, use the Delta download centre and manufacturer support. Delta’s DOPSoft v2.00 availability FAQ explains under its DOP-B heading that v2 is no longer downloadable from the centre. Supply the full DOP-W model and project version when contacting support. That FAQ’s DOP-B conversion information does not establish automatic compatibility for every DOP-W project.

Discontinuation and replacement planning

Delta’s global product list identifies all three as discontinued in December 2021. Its replacement references are DOP-W105B → DOP-110IG, DOP-W127B → DOP-112WX and DOP-W157B → DOP-115WX. These are manufacturer references, not a guarantee of direct mechanical, interface or project interchangeability.

Compare the cutout, resolution, USB count, COM pinout, Ethernet settings, supply and project functions during replacement. Establish the condition of a used DOP-W from its own label and testing. Historical catalogue dates do not independently establish production start or discontinuation.

Editor’s note

Start with the full model and cutout, not screen size alone. Even W127B and W157B, which share a resolution, require different panel openings. Record bezel dimensions separately from the cutout.

For restarts or unstable images, check 24 V at the panel terminals under load, including with USB devices attached. Eliminate loose connections and cable voltage drop before downloading software.

A resetting clock is not a reason to look for a CR2032. This family uses supercapacitor RTC backup. Record the outage duration and preceding operating conditions, and distinguish a clock fault from project/data loss.

Check the touch surface at corners, edges and the centre. Inspect gasket/bezel pressure, dirt and overtightened fasteners. Do not attempt repairs by pressing with hard objects or tightening screws further.

On used units, test both Ethernet ports, COM2/COM3 and the fitted USB Hosts separately. A boot screen or one readable PLC value does not prove every interface is serviceable.

Preserve the original working project. Verify recipes, macros, alarm timestamps and communication settings individually after migration. Successful compilation does not complete machine-level validation; perform controlled commissioning.

Related panels and documents

Legacy panel generations are covered under DOP-A, DOP-AE, DOP-AS and DOP-B; handheld panels under DOP-H07 and DOP-107H. TP text panels, TP04P and TP70P belong to different panel/control classes.

Assess remote I/O modules, digital I/O expansion and HMI starter kits against their own compatibility documents. Use Delta HMI PDF files and Delta PLC and HMI manuals to select documents. Return to Delta HMI families or browse available used Delta products.

Manufacturer documents and external references

DOP-W105B/W127B/W157B instruction sheet — 11 April 2016, 5012618605-WB05 contains four languages including English and Turkish; Turkish is on PDF pp.3–4. The combined DOP B/H/W catalogue — 2 December 2016 document-code edition provides DOP-W specifications on PDF p.21 and cutout drawings on pp.25–26. Both are distributor-hosted copies of manufacturer documents.

Discontinuation and replacement records: official DOP-W105B record · official DOP-W127B record · official DOP-W157B record. The current global list appears under Delta HMI products. Some backlight-life figures differ between the instruction sheet and catalogue, so no single service-life guarantee has been inferred.